BOOTICE & Partition Guru Free

[ Ver 5.1.1.696 ]
https://www.eassos.com/download.php

Enhanced:

Optimize the function to restore NTFS partition from image and improve restoring speed.
Optimize the speed of cloning NTFS partition.
Optimize file recovery function for NTFS partition.
Optimize file recovery function for FAT32 partition.
During creating new partition, it allows to preset formatting parameters like Cluster Size and Volume Label.
Create New Partition and Quick Partition dialog boxes automatically judge sector number required for partition alignment, and do not show sector number that does not meet alignment requirement.
Improve stability of cloning partition or disk by hot migration.
As to OEM partition on GPT disk, partition name on Disk Partition Structure area shows "OEM".
When a disk is cloned by file, the application automatically changes to by sector when encountering encrypted partition which is not decrypted.
Default settings of Quick Partition function save configurations like partition size, file system format, volume label, etc.
Add a function to optimize disk by way of TRIM technology.
The status bar shows recovery success rate reference value for current partition after File Recovery finishes scanning.
Optimize video file preview feature and prevent exceptions.

Fixed:

Fixed an issue that in rare cases it appeared on operations of writing files to NTFS partition.
Fixed an issue that in rare cases application froze when deleting folder from NTFS partition.
Fixed an issue that in rare cases application crashed during backing up NTFS partition by file.
Fixed an issue that application launched with low speed in WinPE.
Fixed an issue that volume name was not correctly set for FAT32 partition.
Fixed an issue that exception occurred when loading VHD with fixed format.
Fixed an issue that it couldn't align partition to sector number which was less than 2048.
Fixed an issue that in some cases exception occurred during searching for hex or string in sectors.
Fixed an issue that sometimes it couldn't find out partitions when searching from customized cylinder range.
Fixed an issue that the incremental backup of EXT4 partition generated an excessively large image file.
Fixed an issue that partition number was not restored after loading default settings of quick partition.
Fixed an issue that files could not be filtered by size after searching for lost data.
 
DiskGenius Free 5.1.2.766

New

Support modifying GUID partition parameters.
Support changing MBR signature and disk GUID.
Partition list adds Attribute tab to show partition status (hidden, active, read-only).
When backing up system partition by files, directories like "Desktop" "Music" and "Pictures" can be excluded.

Enhanced

Enhance operations and controls for file copy, supporting Skip, Pause and ways to handle preset errors, and supporting shutting down computer after file copy completes.
Improve the displayed content for file copy details.
Check if destination partition space is sufficient prior to copying files and give prompt if there is not enough free space.
Optimize user experience of file preview function.
Disk partition map shows "Basic" "Dynamic" and partition table type for current disk.
In the partition and folder tree area, the read-only partition displays a lock icon.
FAT32 file system is used by default when creating an ESP partition.
Enhance file recovery function for NTFS partitions.
Enhance recovery function for video format file of hard disk recorders.
Enhance the function of getting and showing disk SMART information.
The partition information pane shows device path in the form of HarddiskVolume.
A warning is prompted when saving partition table after modifying dynamic disk partitions.
Operations like format, hide partition, erase free space, restore partition, etc. are forbidden on dynamic partitions.
Prompt users to update software when partition backup image created by a higher version is accessed by a low version.

Fixed

Fixed a byte order display issue for EXT4 partition UUID.
Fixed an issue that certain Office documents couldn't be previewed.
Fixed an issue that in the rare case functions like backing up partition table couldn't be used.
Fixed an issue that in some situations partition map of dynamic disks displayed incorrectly.
Fixed an issue that cluster size was incorrect after formatting exFAT partition according to the default cluster size.
Fixed an issue that partition map didn't update smoothly after changing the size of program interface.
Fixed an issue that in rare cases partition error occurred to Quick Partition function.
Fixed an issue for Quick Partition function that happened during saving and loading default settings.
Fixed an issue that write disk error occurred when resizing other types of partitions on a disk that contains Linux partitions.
Fixed an issue that partition might be lost after saving partition table for a disk that contains Linux partitions.
Fixed an issue in some cases files under Recovered Types were not classified by extensions.
Fixed an issue that the program might stop responding when recovering files from NTFS partition.
Fixed an issue that in some cases lost BitLocker partitions couldn't be recovered.
Fixed an issue of displaying drive letter for dynamic volumes.
Fixed an issue that in some cases MBR wasn't restored after restoring system partition from image file.
Fixed an issue that EFS encrypted file data was incorrect after restoring NTFS partition backup.
Fixed an issue that Goto directories was not accurate after recovering files from exFAT partitions.
Fixed an issue in the function of FAT32 file recovery.
Fixed an issue that the restored FAT32 partition might not be open if it was backed up by sectors or structure.
 
Disk Genius: Version: 5.3.0.1066 Updated: Jul 30, 2020

home : https://www.diskgenius.com/partition-management.php

installer : http://engdownload.eassos.cn/DGEngSetup5301066.exe

32b portable: http://engdownload.eassos.cn/winpe/DGEng5301066_x86.zip
64b portable: http://engdownload.eassos.cn/winpe/DGEng5301066_x64.zip

Lite 32b : http://engdownload.eassos.cn/DGLiteEng5301066_x86.zip
Lite 64b : http://engdownload.eassos.cn/DGLiteEng5301066_x64.zip

changelog : https://www.diskgenius.com/version-history.php

Disk Genius : Version: 5.3.0.1066 Updated: Jul 30, 2020
New
1. Support high-resolution displays (DPI adaptation). The interface display is no longer blurred when the software runs on 4K screens and laptops.
2. Support to virtualize current Windows operating system into VMware virtual machine.
3. Disk cloning function supports to clone large disk to small disk and allows to change the size of each partition on target disk.
4. Start to use an independent preview process and improve the stability of the main program.
5. The number of CPU threads can be specified for compression mode in the advanced settings of the partition backup function.
6. The search for known file types in file recovery function adds support for CR3 file format.
7. The function of creating vmdk virtual disk supports to set target disk as SATA and NVMe.

Enhanced
1. When formatting a FAT32 partition, it allows the total number of clusters to exceed the limitation Windows sets to FAT32.
2. The DBR of Windows 10 is used when formatting FAT12/16/32 partitions.
3. When backing up system partition by files, the "DiskGenius WinPE" directory is excluded by default.
4. After drive letters are assigned, the currently selected partition will not be switched automatically, preventing users from selecting the incorrect partition when the user operates too fast.
5. It is allowed to set the software to prevent system from going to sleep when performing time-consuming functions.
6. Improve video preview function and support newer formats.
7. Optimize the file recovery effect of FAT32 partition.
8. Optimize the result of recovering deleted large files from NTFS partition.

Fixed
1. Fixed some issues for system migration function to improve the stability.
2. Fixed an issue that the function of backing up exFAT partition by files did not support vary large files.
3. Fixed an issue of incorrectly reading dynamic volumes and LVM volumes.
4. Fixed an issue that exceptions occurred to partition backup function when inputting a file name without extension.
5. Fixed an issue that there was free space when quick partition function created only one partition.
6. Fixed an issue that system did not restart when executing certain function that required restart.
7. Fixed an issue that sometimes the extend partition function could not be opened correctly.
8. Fixed an issue that the font of sector editing function was not sightly after booting to WinPE.
9. Fixed an issue that in some cases the disk cloning and partition cloning function might stop responding.
 
Back
Top