EscSysRq
Adept
here is my diy waterblocks for cpu and gpu they are working good and tested for leaks overnight.. they were lath-machined not CNC'ed so they may lack some points on finishing but they relly helps bring temp down .. selling coz not able to find good-cheap DC pump .. [they are used with 2 cooler pumps connected in parallal
]
on gpu block i was able to take 8600gt to 890 \ 1836 \ 1800 !
cpu waterblock is made for amd platform as that time i had that !! but since block is of Cu and cover is of acryllic u can always make one for intel platform!
gpu-block is for 8600gt and can be fitted over any card which has same screw hole array!
i also have same dimension Cu slabs which were not shaped as they are for back-up for the event if machining distroys other blocks but are not needed! [not in pics!!] if any body interested in those i will give them for 300 rs!!
note: u may try to diy all this, so let me tell u it will come out to be ~2.5-3k!
pics
gpu block threads
cpu block threads
yo! - phics with ID!
]on gpu block i was able to take 8600gt to 890 \ 1836 \ 1800 !
cpu waterblock is made for amd platform as that time i had that !! but since block is of Cu and cover is of acryllic u can always make one for intel platform!
gpu-block is for 8600gt and can be fitted over any card which has same screw hole array!
i also have same dimension Cu slabs which were not shaped as they are for back-up for the event if machining distroys other blocks but are not needed! [not in pics!!] if any body interested in those i will give them for 300 rs!!
note: u may try to diy all this, so let me tell u it will come out to be ~2.5-3k!
can trade it with any thing good!!
pics
gpu block threads
cpu block threads
yo! - phics with ID!
