OC & Modding Intel E5200 temp at Gigabyte UD3L without overclock

[blackperl]

http://www.techenclave.com/overcloc...ing-e5200-on-gigabyte-g31m-es2l-138820-3.html

here is mine temp without overclock using Intel cooler



seems something wrong

 

[rapt0r]

Definitely wrong, whats room temp there ? Reseat the heat sink and apply some thermal paste like arctic silver.

 

[blackperl]

i bought it 2 days before

Temperature:37°C,i will try to re seat the heat sink

 

[SidhuScorpion]

Its fine, load temp 61C in Orthos, in gaming etc temps will be 7-8c lower.

 

[blackperl]

i did not overclock it ,i m using it just for general purpose

 

[vinaycm]

I think the temps are a bit high.. It should be a max of arnd 54-55 degress on stock speeds & stock cooler.. Try reseating the hsf & applying a fresh coat of thermal paste.. Also make sure that the thermal paste is evenly spread b/w the proc & cooler..

 

[blackperl]

applying a fresh coat of thermal paste.. Also make sure that the thermal paste is evenly spread b/w the proc & cooler..

but bro,as you know now a days paste is already applied to the bottom of the cooler.i think i need to buy some artic silver paste this time

can you suggest some cheap cooler ??

 

[udayrulz]

The temperature is fine considering ambient temp is quite high .

 

[The Sauron]

Temperatures are absolutely normal no need to worry ,for better results make use of 3rd party coolers+120mm fans in cabby for airflow.

 

[dragon_unleashed]

Ur temps r abs correct so dont worry.

 

[sudan_rulz]

check out with the core temps....
try to set it manually......

mine mobo on auto took it till 1.5 after ocing it to 3 ghz which is pretty dangerous....

so i hav set it manually nd now my temps at 3.3 ghz r jst around 60(ran orthos for 30 mins)