4 pin PWM connecter help

Status
Not open for further replies.
Arbiter_ck

Arbiter_ck

Inactive
Contributor
Hi Guys,

I want to install CORSAIR CMXAF2 RAM cooler and 2 Cooler Master XtraFlo PWM 120mm Case fans to my systems. But on my mobo there is only one 4 pin PWM slot available and RAM cooler and fans have 4 pin PWM connecters.
So, is there any 4 pin to 4 pin PWM multi connector available in India/Pune?
Can some one help me please..

Thanks,
Pramod
 
Yes, you will get 4 pin molex to 3/4 pin PWM connectors, but they will not support reading the speeds and all. If you need that, have a look at some fan controllers having them. however, they will be expensive.
 
You dont need convertors to put 4pin fan to 3 pin mobo or vice versa.
 
4 pin splitters are not possible. if you want to run them off a molex connector, connect 2nd wire from right to yellow from molex and the rightmost to black from molex. You can either pay for expensive convertors or cut wires and DIY.
 
SunnyBoi said:
4 pin splitters are not possible. if you want to run them off a molex connector, connect 2nd wire from right to yellow from molex and the rightmost to black from molex. You can either pay for expensive convertors or cut wires and DIY.
Click to expand...

4 pin splitters are possible. Check this link

PWM Splitters - Overclock.net - Overclocking.net

But problem is I cant find it in India/Pune :(

Also one noob question:

I found one 3 pin North Bridge fan header slot on my mobo. Can I attached one of the fan on this slot?
 
Status
Not open for further replies.
Top Bottom