Hi All,
This is mike. I would to inform all the pacenet/5net/sify users
of sion/koliwada/antophill/wadala/dadar area that me and a bunch of
people have managed to setup a hub for dc++ / czdc++ / strong dc++. All
are Invited.
This is a LAN Hub. The Hub Address is 192.168.0.200. and u will
be needing at least 1gb of shared data to join.
If u wish to join, then follow these steps.
1. download the new version of borg chat v0.9.9.428 from
http://borgchat.softnews.ro
2. u will have to install few protocols
--go to control panel > network connections > local area connection
> properties. then click on install .. select protocol .. install all the
protocol seen here. then restart ur m/c.
3. U will have to run the home networking wizard.
--go to control panel > network connections .. in the left panel .. u
will find a option of "Set Up A Home or Small Office N/w". click on it
then run the wizard.. here are the options to select... next>next>others>
"this computer connects to internet directly or thrugh a n/w hub. other
comps on my n/w also connect to the internet directly or thru a hub" >
select any comp descp and name > workgroup name as MSHOME > Turn on file
and printer sharing > complete the wizard. that's it. And Restart ur
M/c.
then start borg chat.
setting of Borg Chat ..
1.go to Options> General options > go to user list / lan tab > here set 1
min as refresh time and check the " On new user connect Refersh the lan
list"
2.go to Options> Connections > select UDP Broadcast and add the following
addr
255.255.255.255
255.255.255.0
255.255.0.0
255.0.0.0
0.0.0.0
and select n/w interface as auto selection.
if u have done all this u should be able see people in brog chat. If u
Find people like neolight / dc++hub192.168.0.200 / iceman / prazer / jeez
/ mafia u can chat with us in the main window there is two more things
that u need to do that we will explain.
1. setting up ur ip address
2. connect to the hub
Mike
:thanx:
This is mike. I would to inform all the pacenet/5net/sify users
of sion/koliwada/antophill/wadala/dadar area that me and a bunch of
people have managed to setup a hub for dc++ / czdc++ / strong dc++. All
are Invited.
This is a LAN Hub. The Hub Address is 192.168.0.200. and u will
be needing at least 1gb of shared data to join.
If u wish to join, then follow these steps.
1. download the new version of borg chat v0.9.9.428 from
http://borgchat.softnews.ro
2. u will have to install few protocols
--go to control panel > network connections > local area connection
> properties. then click on install .. select protocol .. install all the
protocol seen here. then restart ur m/c.
3. U will have to run the home networking wizard.
--go to control panel > network connections .. in the left panel .. u
will find a option of "Set Up A Home or Small Office N/w". click on it
then run the wizard.. here are the options to select... next>next>others>
"this computer connects to internet directly or thrugh a n/w hub. other
comps on my n/w also connect to the internet directly or thru a hub" >
select any comp descp and name > workgroup name as MSHOME > Turn on file
and printer sharing > complete the wizard. that's it. And Restart ur
M/c.
then start borg chat.
setting of Borg Chat ..
1.go to Options> General options > go to user list / lan tab > here set 1
min as refresh time and check the " On new user connect Refersh the lan
list"
2.go to Options> Connections > select UDP Broadcast and add the following
addr
255.255.255.255
255.255.255.0
255.255.0.0
255.0.0.0
0.0.0.0
and select n/w interface as auto selection.
if u have done all this u should be able see people in brog chat. If u
Find people like neolight / dc++hub192.168.0.200 / iceman / prazer / jeez
/ mafia u can chat with us in the main window there is two more things
that u need to do that we will explain.
1. setting up ur ip address
2. connect to the hub
Mike
:thanx:
