Another Port forwading question

superczar

superczar

Juggernaut
Need to set up port forwarding tonight as my torrents are coming in real slow

Here is my network setup:

---Phone Line----Beetel 220BX ADSL Modem-----------------------Belkin 802.11b/g router-------V (antenna)
WAN IP:202.x.y.z----------NATted IP: 192.168.1.1---------192.168.1.2 ------192.168.2.1

Accessed by :
5 machines with manually assigned IPs 192.168.2.2- 192.168.2.6

Now I need to setup port forwarding for Azureus on 2 of the above machines as they stay up 24X7 (192.168.2.2 and 2.4)

What I figured out so far:

- Set up Azureus to use say port 40000 on 192.168.2.2 and a different port , say 40001 on 192.168.2.4

- Enable a port forward from the WAN IP (port 40000) to port 40000 on 192.168.2.2 and similarly for 40001 on 192.168.2.4

- Most web tuts do not have much info (surprisingly ) on a double layered network setup like mine (Modem-Router -PC) and talk about a direct port forward from modem to PC

- Now say if I do this, will it work?

A) Set up TCP and UDP port forward on the ADSL modem for both port 40000 and port 40001 from Modem's NATted IP (192.168.1.1) to the Belkin Router's WAN IP (192.168.1.2)

B) Set up TCP and UDP port forward on the Belkin router for port 40000 from Belkin Router's LAN IP (192.168.2.1) to PC 1 (192.168.2.2 ) and port 40001 from router LAN IP (192.168.2.1) to PC2 (192.168.2.4)
 
By the way is it possible for me to forward all ports from the ADSL modem to the wireless router and then setting up limited port forwarding on the wireless router only ....

After all it is pointless to have a double DMZ setup when only one should be enough?
 
Alright, never mind this thread...Port forwading works fine now:

I forwarded a large range of ports from the ADSL modem to the router, and did individual IP mapping for single ports from the router to the Machines...

EVerything works as expected now :hap5:
 
Back
Top