Ask the shop who is selling u the acrylic as they will be able to assist with the same.Anyone here know a place that can make an acrylic panel for a case? I recently broke the side panel of my Corsair 4000x and am sceptical of getting another glass one. I thought of getting an acrylic panel made for the case. Thanks in advance.
Any site from which I can buy the magnetic tape? Amazon has very limited options.any acrylic shop/number plate shop/switch board cutting shops can do it for you. Just tell them dimensions and they will cut a piece for you.
On my sidepanel, I have stuck magnetic tape on all 4 edges so the acrylic sidepanel just "sticks" to the case without needing any screws.
![]()
Yea my tempered glass panel shattered when I was trying to fix it. Not sure what even caused it. Luckily I had not removed the plastic film. Except for a few pieces of glass flying everywhere and some glass dust most of the mess stuck to the film. Only need to dispose the broken panel now. Have contacted Kaizen and they said I can collect the replacement in about 2 weeks. However, I am super skeptical of using another glass panel.This reminds of those golden years 2k3-2k9 where people here used to mod their cabinets by diy side pnales etc.
Thanks. Can I find acrylic sheets at hardware shops? Or is there any place specific that I need to look?Ask the shop who is selling u the acrylic as they will be able to assist with the same.
I got mine from aliexpress. I'm not sure if its available locallyAny site from which I can buy the magnetic tape? Amazon has very limited options.
best place to find one right now is the people who make automobile number plates. they will either have it or will order one for you based on requirement. plus they can print on it and give you a special editionAny site from which I can buy the magnetic tape? Amazon has very limited options.
Yea my tempered glass panel shattered when I was trying to fix it. Not sure what even caused it. Luckily I had not removed the plastic film. Except for a few pieces of glass flying everywhere and some glass dust most of the mess stuck to the film. Only need to dispose the broken panel now. Have contacted Kaizen and they said I can collect the replacement in about 2 weeks. However, I am super skeptical of using another glass panel.
Thanks. Can I find acrylic sheets at hardware shops? Or is there any place specific that I need to look?
What CM case is this , i also need to get my CM690 into shape ,is it anylater version of CM 690 ?any acrylic shop/number plate shop/switch board cutting shops can do it for you. Just tell them dimensions and they will cut a piece for you.
On my sidepanel, I have stuck magnetic tape on all 4 edges so the acrylic sidepanel just "sticks" to the case without needing any screws.
![]()
this is the original CM690, heavily modded thoughWhat CM case is this , i also need to get my CM690 into shape ,is it anylater version of CM 690
I also had the cm690 ii a couple of years back. My first proper pc case.this is the original CM690, heavily modded though
Will probably have to do with button magnets and some fevikwikI got mine from aliexpress. I'm not sure if its available locally
Thanks will go out and look for one.best place to find one right now is the people who make automobile number plates. they will either have it or will order one for you based on requirement. plus they can print on it and give you a special edition![]()
Wont they charge a lot though?Go to CNC cutting people ,those fancy jaali makers they will do it for you with good finish
I did speak to a local glass vendor. He quoted 600 for 6 mm thick toughened glass. But as mentioned, I want to get an acrylic panel as I do not want the hassle of another sheet of shattered glass. Also, I raised this issue with Kaizen. They have asked me collect the replacement panel from their office tomorrow.Another option is to get glass panel if you don't manage to source acrylic.
Any photo frame shop guy can get it done for you for around 300 rs
Yup. I went looking for acrylic sheets today. No luck. Will probably order from Amazon. Hope I can cut the sheet to the required size myself using a stationery cutter.Get a strong double-sided tape and those small thin wall/door magnets. If you have double-sided tape you won't need any screw. It depends on the quality of the tape though. What I have is one from 3M (I got it via Amazon US). Really strong. Can lift over 5kg without breaking a sweat lol.