demon_slayer
Disciple
Hi folks, I run a small pikvm setup for my NAS since I don't live where my NAS lives and therefore need to be able to control/fix the NAS remotely in case I run into any issues.
For the pikvm, I need a custom usb cable which has power and data lines split, not going to go into any details but this is required for a diy pikvm setup.
Now the problem is that I designed the said cable and I'm guessing because of my lack of soldering skills / selection of wires, I always keep running into issues like low voltage on the pi or something else.
I then ordered the following splitter board from ebay splitter board and after waiting for more than a month and a half, it got lost in transit and I got refunded. I don't want to go this route again and hence reaching out wondering if someone can make such a board here in India and ship it to me.
Or better, create a usb data-power split cable.
Happy to discuss / provide more details on what I need.
Thanks !
For the pikvm, I need a custom usb cable which has power and data lines split, not going to go into any details but this is required for a diy pikvm setup.
Now the problem is that I designed the said cable and I'm guessing because of my lack of soldering skills / selection of wires, I always keep running into issues like low voltage on the pi or something else.
I then ordered the following splitter board from ebay splitter board and after waiting for more than a month and a half, it got lost in transit and I got refunded. I don't want to go this route again and hence reaching out wondering if someone can make such a board here in India and ship it to me.
Or better, create a usb data-power split cable.
Happy to discuss / provide more details on what I need.
Thanks !
