how much can i oc ???

princeoo7

princeoo7

On a Journey called Life :P
Juggernaut
friends i wanted to know how much can i oc my cpu and igp gup ????

i have the following :

1. amd phenom ii x6 1055t
2. 880gm-ud2h
3. corsair gs 600
4. gskill ripjaw cld9 4gb kit.

how much on stock can i do.

i dont have any 3rd party cooler and a roomy cabinat .

pls... guide.

--- Updated Post - Automerged ---

like i read that amd temperature sensor is not the accurate one .
can any someone tell how to major the accurate temperature of all parts...
thanks and do reply .
 
talking normally you should get near to 3.2 GHz (Multiplier-14* Bus Speed-230)
Check the temperatures side by side also perform some stress tests to check stability .
i think SpeedFan gives some accurate temps...
 
Hey, we pretty much have the exact same cpu+motherboard.

Here's what I recommend. First disable all the unnecessary features like Amd cool and quiet, c1e, turbo core...

Next raise ur fsb to 242. This will give you an instant speed boost to around 3.39ghz. However, ur temps will be too high for stock cooling.

So go to ur voltage section and lower ur Cpu core voltage by -1.00v.

You will now get a healthy overclock of 3.4ghz and cool temperatures. Don't try for anything above this as you won't have stability with those voltages or you'll end up overheating ur chip.

The only accurate temperature sensor I've seen so far is Everest. All others have been wrong. Remember to not let your cpu temperature cross 62c.

Sorry I don't know about igp.
 
@RD274: means i have to go to bios and do that ???? right now i have decreased some voltage and it is near 1.3240 like ..... :)

and turbo cor is on . so now i should just of it in bios and then increase fsb in easytune6 or where can i do that in bios ???

--- Updated Post - Automerged ---

when ever i try to increase fsb in bios and reboot, leaving every thing else fsb gets to its original at 200 ???
even tried with easytune6 but when i get above 230 or so the pc gets hanged and monitor gets big pixels blocks shaking.
 
Yes you need to go to the BIOS and do that. Good lower voltages = lower temps. Turbo core is a waste .... I've never seen it working properly when I was on stock. Chanfe everything from the BIOS not Easytune6 as Easytune has several bugs which will lock up your computer.

But wait, before doing anything -
- Have you overclocked before?
- Please post a CPU-Z screenshot

^ First answer these. I don't want you risking your system so early :bleh:
 
no nerver tried and the link is

valid.canardpc.com/show_oc.php?id=1498357

also look at this link, not my te member but we both have same mobo and i tink ram to but he must have oc'ed it.....
what do u think ???

valid.canardpc.com/show_oc.php?id=1445731
 
I believe you don't know the basics of OC'ing... you should first go through some articles, about how to do it and then ask if you have any questions... Also OC a CPU automatically increases a lot of things like FSB, PCI Express speed, vcore, temps etc...

Overclocking Basics - OverclockersClub Forums

The Absolute Basics on how to Overclock your CPU - Guru3D.com Forums

have a look and then what you don't understand ask here, OC'ing in itself is very dynamic in nature.. varies from chip to chip... So someone can not obviously tell you that do this and you'll get this.... you need to find out the maximum OC that you CPU can do and lower down till you find the most stable Hz... i suggest getting Prime95, or Intel burn test (dunno if it works with AMD).. Prime 95 for 4 hours, or Intel Burn Test 5 runs, 4 threads, Standard mode will tell you if your rig is stable enough....
 
got up to 3.4 and 3.5 ghz :cool2: on stock but at the time of stabiliy test something goes wrong and the test stops . dont know whats the error :(
it happends in everest, prime95 and even in amd overdrive. :(

plus want to know about how to oc the ram

i have the ripjaw cl9 ram of 4gb...

help
 
Back
Top