Budget 31-40k PC For CAD and Light 3D Modeling

Viz

Disciple
Questions
  1. What is your budget?
    • 40K
  2. What is your existing hardware configuration (component name - component brand and model)
    • None
  3. Which hardware will you be keeping (component name - component brand and model)
    • None
  4. Which hardware component are you looking to buy (component name). If you have already decided on a configuration then please mention the (component brand and model) as well, this will help us in fine tuning your requirement.
    • Please Suggest
  5. Is this going to be your final configuration or you would be adding/upgrading a component in near future. If yes then please mention when and which component
    • would like to upgrade in the next 2-3 years, probably RAM
  6. Where will you buy this hardware? (Online/City/TE Dealer)
    • Online
  7. Would you consider buying a second hand hardware from the TE market
    • No
  8. What is your intended use for this PC/hardware
    • Office work AutoCAD and Revit (not heavy modeling though), so must be reliable with little downtime.
  9. Do you have any brand preference or dislike? Please name them and the reason for your preference/dislike.
    • No
  10. If you will be playing games then which type of games will you be playing?
    • No
  11. What is your preferred monitor resolution for gaming and normal usage
    1. 21.5" Screen
  12. Are you looking to overclock?
    • No
  13. Which operating system do you intend to use with this configuration?
    • Windows 7 64 bit
I am not sure if the budget is sufficient to build a decent PC that can be useful for the next 3-5 years, please let me know your valuable suggestion, thank you in advance for your time
 
Intel Core i5 4440 -11000,
Gigabyte B85M-D3H -5500,
Kington HyperX Fury 8GB(2*4GB) -5400,
WD Caviar Blue 1TB-3500,
Deepcool Tesseract SW -3300,
Dell S2240L 21inch LED IPS -7500,
Corsair CX500 -3500,
Logitech MK200-800.
Total -40,500.
 
Hi Sunil,
Thanks for the response, I was thinking of raising the budget and getting a graphic card, http://www.snapdeal.com/product/nvidia-leadtek-quadro-k-420/664910881146#bcrumbLabelId:305, Please sugest
Also the Cabinet you had suggested is not available on Flipkart, Amazon or Snapdeal, can you suggest an alternate.
Instead of two Kingston HyperX Fury, how about this one - http://www.snapdeal.com/product/corsair-8-gb-ddr3-ram/1430570
Don't really understand the difference but this one is coming slightly cheaper than the PSU you had suggested - http://www.snapdeal.com/product/corsair-vs-550-smps/509795 abour 500 lesser, is that ok?

Thanks again for all your help.
 
Hi Sunil,
Thanks for the response, I was thinking of raising the budget and getting a graphic card, http://www.snapdeal.com/product/nvidia-leadtek-quadro-k-420/664910881146#bcrumbLabelId:305, Please sugest
Also the Cabinet you had suggested is not available on Flipkart, Amazon or Snapdeal, can you suggest an alternate.
Instead of two Kingston HyperX Fury, how about this one - http://www.snapdeal.com/product/corsair-8-gb-ddr3-ram/1430570
Don't really understand the difference but this one is coming slightly cheaper than the PSU you had suggested - http://www.snapdeal.com/product/corsair-vs-550-smps/509795 abour 500 lesser, is that ok?

Thanks again for all your help.
Leadtek Quadro is ok. Deepcool Tesseract is available at amazon.in and go with Kingston Rams as they are gud and running 2 sticks in dual channel mode will help in your pc performance.
 

Attachments

  • Sys Config.png
    Sys Config.png
    76.6 KB · Views: 152
Last edited:
Back
Top