WTB: 500 watts zebby/powersafe/vantec psu

  • Notice: Market Section Posting Privileges

    Dear Guest,

    We appreciate your interest in participating in the Marketplace. To maintain a safe and reliable trading environment, posting privileges are granted only to users who meet the following criteria:

    • Minimum 25 forum posts in technical sections
    • Account age of at least 30 days

    Alternatively, you can gain accelerated access by upgrading to Enclave Plus Membership, which includes additional perks and privileges.

    If you have any questions or wish to learn more about becoming an Enclave Plus member, please feel free to reach out to us using the 'contact us' form in the footer..

Status
Not open for further replies.
R

raj404

Inactive
Contributor
Feedback: +37 / =0 / -0
presently have a 400 watts(12V/Amps Powersafe), but comp hangs/restarts/freezes (Prescott 2.8e HT, 865GBF, 6600GT, 2HDDS, DVD writer, COMBO cd/dvd,2 80mm fans, Vantac HSF)

but when i replace the Prescott with my old & trusted P4 2 ghz CPU, the
comp gives no trouble at all!

Maybe a 500 watts Psu might power/stabilise the Prescott sufficiently

Hence WTB a 500 watts zebby/powersafe/vantac psu
 
Iam no techie....but if u get Powersafe get 500w one and make sure you get the OEM of L&C...Maybe a case of bad apples bur lot of Powersafew come with VIP OEM and they increased my temp like hell until I go Powersafe with L&C OEM...
 
thnks for the head-up on powersafe "L & C".my present 400w powersafe is
"L & C"; & am aware of the fact that VIP OEM r not that efficient.

i understand zebby has a 540w model & vantec a 480w.anyone has a second
hand Psu of these for sale?

bump..
 
budget for the PSU is max 1.5k for powersafe 500w & 2k for the vantec 460W/zebby 540W zebby(skyhawk) max 2k
 
What are the ratings of your Powersafe, If it is the same one as i have, then it should be more than sufficient to power your rig.

My Power ratings do not shift more than 3% at all at load when overclocked to 2.55 Ghz.
 
CPU Core 1.46 V
voltage value in Everest r as follows:(for the P4 2 ghz cpu)

+1.5 V 1.46 V
+3.3 V 3.23 V
+5 V 5.16 V
+12 V 12.19 V

r these ok? i have removed the prescott as i was having problems(although heat issue was solved by the vantec HSF + AS5)
 
Status
Not open for further replies.
Top Bottom