@anmolbhard004 help will be appreciated
GPON SN: (Printed at the back of your airtel router]
username and password to login to vsol
username- admin
password-- stdONUi0i
after logging in please update to 1.8 fw 1.17 has some bugs
VSOL V2802RH or Photon PTF2282
To get access to telnet (Use MS Edge browser and translate to English)
开箱简介VSOL 简称（芯德）成立于2007年，长期从事于光通信网络接入和终端的开发，专注于光通信网络接入领域综合应用解决方案的研究和开发。V280
post.smzdm.com
use putty.exe to access telnet
Make sure you enter correct IP of ONU and port 23 for telnet
telnet commands
flash set GPON_SN ALCLxxxxxxxx
flash set GPON_PLOAM_PASSWD 0
cfgmib set OMCI_SW_VER1 3FE49362JJIJ54
cfgmib set OMCI_SW_VER2 3FE49362JJIJ50
flash set PON_VENDOR_ID ALCL
cfgmib set OMCI_TM_OPT 2
Pass these 2 command at the end to save and reboot ONU
cfgmib save
restart
To get VLAN IDs after O5 state:
omcicli mib get 84
Disable the annoying Captcha at login
flash set VALIDATE_CODE_SWITCH 0
Pass these 2 command AGAIN at the end to save and reboot ONU
cfgmib save
restart
PPPoE
Username:
Password:
VLAN ID 100
Official Firmwares
Useful Resources and links:
tripleoxygen.net
Tutorial trocar modem de fibra de qualquer operadora no brasil. Neste exemplo vamos ensinar a trocar o modem da provedora pelo VSOL V2802RH.
viniciuspaes.com
Soc: 9601D Flash: 4MB Optics: SC/UPC Image: Full dump: v2802rh_full_dump.bin Firmware update (V1.1.4): v2802rh_v114.img Env: b0=setenv bootargs ${bootargs_base} ${mtdparts0} ${rst2dfl_flg}; bootm $...
github.com
do ping if you need more help
