cranky

It is available now in a couple of online stores.

Careful with tape. I bent a 970 Evo Plus like a banana while removing the heatsink because I forgot I had used tape to attach it. Drive...

I have both the 5900X and the B550-ITX (two different systems). I see over 150W on my 5900X at peak load, this is about 125A. The...

My CPU was hitting 95 degrees when under load with the stock cooler. I decided to install the Cooler Master Hyper Tx3 and put in a total...

I've had the opposite experience, but I usually don't run Windows on them anyway, and they are rarely turned off.

Lancool 207 is the smallest mainstream case that can fit your motherboard. There's the Coolermaster Qube 500 (?) which is also small...

I was looking for the exact SKU, not the family description. Wasn't sure if this is a genuine Intel product or an outsourced version...

I picked up this NUC a week or so ago, looks like the sale price is still active. I actually bought it at 25k, then noticed price had...

Kingston HyperX DDR3 1866 2x8GB, but not a matched kit. DM me if interested.

Yes

The bonding you talk about at your home is the earthing rod. Its purpose is to bring the apparent resistance value as close to zero as...

I think a diagram will help here: The three-phase transformer is not an accurate representation, it's just what the schematic library...

Heisen is correct in this instance. I talked a bit about this in #7. The ground/earth/neutral reference is from the utility scaffold on...

Re my earlier post: See comments to deduce that certain countries do not allow soldering for mains connections. Also notice this...

Solder is not recommended for any sort of mains work. Use a proper crimp terminal joint, failing which a screw connection. It has to be...