Recent content by Chand

  1. C

    WinXP Pro 32 bit + raid1?

    Is it possible to have 2 sata hdd's configured in RAID1 on WINXP PRO 32 bit??? My delear say's it isnt and has recomended using Win2003 instead. Please advice. Thanks
  2. C

    Graphic Cards Diagnostic tool for 9800pro rendering pipelines?

    The 20 rupees thermal paste that u get. But I'm not sure its up to the task! I tried RTHDRIBL, but it hangs as soon as I start it, same with ATI tool - guess both require directx options enabled - in my case DirectDraw, Direc3D, AgpAcceleration are all disabled! Any other tool that could be...
  3. C

    Graphic Cards Diagnostic tool for 9800pro rendering pipelines?

    Thanks for your response guys! I purchased this card somewhere in dec 2005 from Sammy(Godless) - he didn't mentions me the date he had purchased this card but said its still under warranty. Its an Ati Radeon 9800pro 128 Mb card - with the box mentioning 3 years limited warranty. I had...
  4. C

    Graphic Cards Diagnostic tool for 9800pro rendering pipelines?

    Well, I had purchased a second hand 9800pro from this forum - turned out to be a bad deal as the card became next to useless in just about 2 months of usage. It gives a corrupt screen right from bios. With XP loaded half of the screen to the left is clear, while the other half is corrupt at...
  5. C

    ATi 9800 pro Build with box for Rs.6000/-

    ==> no warranty?? where u from??
  6. C

    PC Peripherals Any special care to be taken when writing DVD Rw's?

    I dont get the Details tab for my DVD Drive when checking its properties using the device manager! The Nero Info Tool certainly does tell a lot though. Here's all the info, including the model num! http://img300.imageshack.us/img300/2070/snap1py.gif
  7. C

    PC Peripherals Any special care to be taken when writing DVD Rw's?

    Thanks for pointing that out! Firmware = a computer program stored on a ROM chip ;) How can I know the firmware version that I'm currently using?
  8. C

    PC Peripherals Any special care to be taken when writing DVD Rw's?

    The drive uses windows drivers hence no updates are available!
  9. C

    How much for this?

    Good question! Maybe cost!? U tell be, benifits of A64 over P4, how do the costs compare?
  10. C

    How much for this?

    I'll try to find the details and post here soon...
  11. C

    How much for this?

    My cousin wants to upgrade to a P4 setup, so he needs to get rid of the following; 1. 1.13 Ghz P3 2. Intel 815 Mobo 3. Samsung 52x cd rom drive 4. Cabinet with psu He'll be selling it to a local dealer, so just want you guy's to indicate how much he should quote for this!
  12. C

    PC Peripherals Any special care to be taken when writing DVD Rw's?

    This is a problem that I had sidelined for a while. Ok this is how it go's; Had purchasd an Iomega Super DVD writer sometime during Nov/Dec 2004. It did everything as it should except write DVD RW's. I used Moser Baer DVD+RW (4x, 4.7GB) and Nero Burning Rom Software. It wrote the data but...
  13. C

    PC Peripherals Networking 2 PC's

    Got the 2 PC's talking with Optilink Cat5e, but had to reduce link speed to 10 Mbps. Is it possible to push it to 100, or is the cables length [16meter]too long or its build quality too poor?? or anyother reason??
  14. C

    Connecting two PCs . Help needed.

    I've just managed to network 2 pc's peer to peer! Wasnt easy, one whole day of dissapointment. Eventually did the following - Decreased the link speed to 10 Mbps.
  15. C

    Monitors 15" Samsung Samtron 55v monitor image distortion.

    decreased color depth to 16bits & increased refresh rate to 75Hz, Ok now. :)
See more
Back
Top