Electric Air Duster/Blower to clean PC internals
- Thread starter Anuj333
- Start date
Using this for a few years now without issues, just keep in mind to never keep pressing the power on switch on blower for more than 9-10 seconds (aka use in short bursts of 9-10 seconds with a gap of 4-5 seconds to avoid motor overheating which seems to be the main cause of failure in such models).
Thanks for this info. Another thing, the one you've linked is a full blown leaf blower. Wouldn't something like this be more suitable for this task:
Portable Vacuum/Air Blower
The one is a vacuum at one end and blower at the other.
Last edited:
That blower is what pc shops in my locality use nowadays & I have seen comments that using blower for pc component cleaning is better than using vacuum cleaner which carries a risk of static electricity.
Tracer_Bullet
Galvanizer
So far from what i have seen vaccum cleaners have weak blowers and vv. Better to get one for each purpose.It's a vacuum in the front and a blower from the back
Leaf blowers are quite strong even at lowest setting and quickly get the job done for me.
Tracer_Bullet
Galvanizer
yeah, cant say about this one as i don't have it.
But i used to use vacuum cleaner as blower too for pc cleaning ( a large maybe 15-20y old model that still works good .. ).
It works ok, but leaf blower is so much better at this. And my leaf blower is pretty lousy as a vacuum cleaner
But i used to use vacuum cleaner as blower too for pc cleaning ( a large maybe 15-20y old model that still works good .. ).
It works ok, but leaf blower is so much better at this. And my leaf blower is pretty lousy as a vacuum cleaner
nsas02
Galvanizer
I have this: https://www.amazon.in/IBELL-Blower-EB60-69-Armature-Variable/dp/B06X9Q3NGG
Extremely useful to blow clean my PC.
Extremely useful to blow clean my PC.
Gohio
Beginner
I have been using this one for almost a year. It does a great job of quick cleaning. But I recommend deep cleaning with IPA at least once a year.
Abdul mujeeb
Beginner
Little expensive but good for removing dust.
Tracer_Bullet
Galvanizer
Dunno, but i have the ibell one. It is very strong, crazy airflow and noise compared to vc, highest setting is insane atleast to me. I use its lowest setting. Need to keep pc fans locked so that they dont spin.
It is maybe built less well. I think it gets hot and button stops responding for a few seconds ( or button is faulty). i did drop it once.
PC cleaning doesnt need too much time, overall it saves me time and effort.
Dushie
Galvanizer
Any model or link details, i am also planning to buy one, but looking for something cheaper
bhp91
Forerunner
Is it comparable to a good quality compressed air can in terms of pressure?
I've used this in the past and it works good: https://www.amazon.in/dp/B00OOXFRG6