PC Peripherals Continuously beeping UPS when playing games

nemo_online

nemo_online

Level E
The issue : Whenever I start playing a game, the UPS starts making a beeping noise continuously but at the same time, there is no indicator for overloading. The indicator light doesn't switch on. Once I exit the game, the beeping stops. This used to happen randomly with only two games but off late it is happening with any game that I try to play. So, unable to play anything on the system. Just one thing that puzzles me is that if the UPS is overloaded, why did it not beep earlier for all games consistently ? I put in my specs on outervision.com based on whatever i could understand and the recommended UPS rating came out to be 750VA and load wattage as 375W. PFA image. If this is correct, I need to change my UPS. Would this 660W APC UPS suffice for my needs? I have seen conflicting reviews on Amazon though so slightly confused.

My main components in the config: Ryzen 5 3500 CPU, RX 6700 XT GPU and a 27 inch QHD monitor. The UPS is a Luminous 600 Pro with 360W output. It is less than a year old, however I lost the purchase papers so can't claim warranty. Local shop said if I exchange it with a higher Wattage UPS from Microtek, will only get 500 bucks.
 

Attachments

  • Power-Supply-Calculator-PSU-Calculator-OuterVision-10-27-2024_10_34_PM.png
    Power-Supply-Calculator-PSU-Calculator-OuterVision-10-27-2024_10_34_PM.png
    344.5 KB · Views: 27
When batteries get weaker the UPS might show overload earlier than expected.
Anyways, you're operating very near to the limits of your UPS. The 360W max output is theoretical and the real would be around 320W or less.

You should get 1100VA UPS for the machine or if you have an home inverter with very good switching time and pure sine wave output then you can use the PC on it directly. To check if your inverter can handle the load you can stress test the PC and simulate a power cut by flipping the MCB off from main power panel. If PC shuts down or restarts or inverter trips then it can't else no need for UPS.
 
enthusiast29 said:
When batteries get weaker the UPS might show overload earlier than expected.
Anyways, you're operating very near to the limits of your UPS. The 360W max output is theoretical and the real would be around 320W or less.

You should get 1100VA UPS for the machine or if you have an home inverter with very good switching time and pure sine wave output then you can use the PC on it directly. To check if your inverter can handle the load you can stress test the PC and simulate a power cut by flipping the MCB off from main power panel. If PC shuts down or restarts or inverter trips then it can't else no need for UPS.
Click to expand...
So, I guess I will go for this - https://www.amazon.in/APC-BX1100C-1100VA-230V-Back/dp/B01ELNPG2I?nsdOptOutParam=true No home inverter as of now. Question for the near future - Who/what would be the best way to find out the needed inverter power for a 3BHK apartment for 4 fans, 6 lights, TV and PC?
 
Well, a basic way is to total up the power consumption of all the appliances you need and make it at least 1.25 times.
So fans is 75W x 4, lights is 25W x 6, TV 80W and PC 400W I guess. Totals up to 930W.
And you should have some buffer leftover as you can't operate on peak output. So around 1200W.

2000VA inverter should suit your needs very well.
 
enthusiast29 said:
When batteries get weaker the UPS might show overload earlier than expected.
Anyways, you're operating very near to the limits of your UPS. The 360W max output is theoretical and the real would be around 320W or less.

You should get 1100VA UPS for the machine or if you have an home inverter with very good switching time and pure sine wave output then you can use the PC on it directly. To check if your inverter can handle the load you can stress test the PC and simulate a power cut by flipping the MCB off from main power panel. If PC shuts down or restarts or inverter trips then it can't else no need for UPS.
Click to expand...
The problem has been solved as I got the APC 1100 VA model. No more beeping in the last two days. Thank you for your suggestions. @enthusiast29
 
The same thing happens with my APC 11VA when I am gaming 4k on my 3080Ti. When the GPU pulls too much power, the UPS continuously makes beeping noises but subsides once the game in minimised.
This would indicate that the UPS is not able to service that power load perhaps?
 
shadowfax90 said:
The same thing happens with my APC 11VA when I am gaming 4k on my 3080Ti. When the GPU pulls too much power, the UPS continuously makes beeping noises but subsides once the game in minimised.
This would indicate that the UPS is not able to service that power load perhaps?
Click to expand...
I think you meant 1100VA. Yes, I think that is the case as ever since I replaced my UPS, the issue of beeping has not recurred.
 
Back
Top