Finally secured all parts for PC but need help with assembling?

TechNickGamer

TechNickGamer

Disciple
After 1 month of scouring several forums, comparing specs, and wrestling with upgradability issues, again coming back with budget to upgradability factors, finally my beast of a machine is taking its shape. Although, I'm still new in building PC, members here have been very much patient in clarifying everything. All the parts am getting are "Like New" meaning I explored second hand market to fit my budget (had to) and I was in fact shocked to see the PC hardware market available is so huge in many platforms like Discord, other subs and even here in TE and today what I learnt is you need to know the right channels and have a little bit of patient for that specific item if you need it.
(Was able to grab a Current gen GPU with almost 2 years warranty still left )

While the parts are still arriving this Weekend am still in finalising/ buying few other parts to setup the rig. I may have few to follow up
1) I never built a PC myself, can I do it myself with DIY videos or is it a Big no for first timers?
2) I don't have a Wifi on Motherboard, do I get a PCIe Wifi + BT Expansion Card or a Wireless Dongle hat supports Wifi+ BT both be easier whichever has less interruptions.
3) I have 7700XT 12GB GPU and its recommended power is 750W only but I have a 850 Watt PSU (850P 850 Watt 80 Plus Platinum). Is there any Undervolting required if yes how?
4) What are some essential softwares after installing Windows 11 if any ?
5) I have a 1100va UPS but few were suggesting to get a 1500va UPS because 7700XT has high on load and backup is way low?
6) The cabinet am getting also is a pre-owned but its a Full tower, I checked the depth(in mm) of PSU, CPU Cooler and GPU and all seem fitting (in max dimensions). Is there any other way to check if there will be a congestion or Air flow problem before before I finalise it?

Specs -
Amd ryzen-5-7600x
Amd-radeon AMD 7700xt
Noctua NH D15 cooler
ASUS B650 Pro Art motherboard
corsair-vengeance(16x2) 32 GB ram 6000mhz
1 tb Kingston gen 4 SSD
ROG thor 850w plat PSU
Corsair Sapphire 780T Full Tower (still in talks of purchase)
 
1) It's pretty easy. Just make sure that if things don't seem to be working and you've tried the basic troubleshooting steps, don't make any assumptions if you are not confident. Advanced troubleshooting should be left to someone more experienced. But hopefully you will not find yourself in such a situation. Linus has good build guides that should be enough for you

3) Undervolting is done mainly to reduce power consumption and temps. You don't have to do it just because your PSU is oversized. Your 850W PSU will work just fine.
 
Another point I would like to add that be gentle with the components, don't force anything and don't rush anything. If you feel like more force is neede, stop and see some build video regarding that part. Proceed only when you're sure.

Regarding WiFi+Bluetooth, I suggest you to go for PCIe card. In my experience, they are more reliable.

You don't need to undervolt but it is always good to undervolt these days (almost same performance with lesser power draw and lesser heat/temps, you might even gain a bit of performance).

Regarding UPS, I suggest you give it a try on your current 1100VA UPS. I feel it should be sufficient for your build. If not, you can try undervolting both CPU and GPU.
 
Last edited:
Hey man, I was a first timer when I assembled my system earlier this year. I was nervous about but still went on to assemble it. But it wouldn't turn on. That time @awestorr was a lifesaver along with some other guys who pitched in to help me to diagnose the situation. Eventually we were able to get it working.

So, I would suggest you to do it along with someone if possible as it is an experience in itself.
Regarding Q.2 - I would suggest getting a PCIE Wi-Fi card with antenna. It is what majority uses.
 
4) I use ninite: https://ninite.com/ to pick a default set of apps (go through the list and just tick which boxes you need). It creates a single file installer that installs all in one go. Great for setting up a new system quickly. If you know of any apps that need some special installation time config, you can skip those and install them manually. Besides the ones listed there, grab things like HWInfo64, MSI Afterburner and a benchmarking tool for stress testing (there are many, I use PCMark as its convenient). Another one that comes to mind is Powertoys: https://learn.microsoft.com/en-us/windows/powertoys/ which includes mutliple useful utilities.

5) 1100 VA should be able to handle about 660W peak load (going by the specs of this APC unit, yours might differ). If your total system draw approaches this number, the UPS might complain with overload warning or shutdown altogether. Given your parts list, it should be okay as PSU calculators put your total wattage to be around 500W, so there is some headroom. The backup depends on the battery config, typical 1100 VA UPS on the market has 2x 7Ah batteries which give you 168Wh of energy. Given that the energy conversion is not 100% efficient, considering the backup to be around 100 Wh, you will have around 10-12 minutes of backup in the best case at 600W load. You'll need to go for a UPS with more # of batteries or bigger batteries if you want more backup time.
 
Last edited:
rsaeon said:
What's your location? Perhaps a member can help your through your build in person if they are local to you.
Click to expand...
Well, I'm from Hyderabad. I would love to take help if that's really feasible you know?! :D

Afxal said:
Hey man, I was a first timer when I assembled my system earlier this year. I was nervous about but still went on to assemble it. But it wouldn't turn on. That time @awestorr was a lifesaver along with some other guys who pitched in to help me to diagnose the situation. Eventually we were able to get it working.

So, I would suggest you to do it along with someone if possible as it is an experience in itself.
Regarding Q.2 - I would suggest getting a PCIE Wi-Fi card with antenna. It is what majority uses.
Click to expand...
Any specific model on the PCIE Wi-Fi card with antenna from Amazon ?

bluefog68 said:
4) I use ninite: https://ninite.com/ to pick a default set of apps (go through the list and just tick which boxes you need). It creates a single file installer that installs all in one go. Great for setting up a new system quickly. If you know of any apps that need some special installation time config, you can skip those and install them manually. Besides the ones listed there, grab things like HWInfo64, MSI Afterburner and a benchmarking tool for stress testing (there are many, I use PCMark as its convenient). Another one that comes to mind is Powertoys: https://learn.microsoft.com/en-us/windows/powertoys/ which includes mutliple useful utilities.

5) 1100 VA should be able to handle about 660W peak load (going by the specs of this APC unit, yours might differ). If your total system draw approaches this number, the UPS might complain with overload warning or shutdown altogether. Given your parts list, it should be okay as PSU calculators put your total wattage to be around 500W, so there is some headroom. The backup depends on the battery config, typical 1100 VA UPS on the market has 2x 7Ah batteries which give you 168Wh of energy. Given that the energy conversion is not 100% efficient, considering the backup to be around 100 Wh, you will have around 10-12 minutes of backup in the best case at 600W load. You'll need to go for a UPS with more # of batteries or bigger batteries if you want more backup time.
Click to expand...
I should have mentioned about the TV im using. Its 4k 55" and also used on the same UPS with a Playstation 5. Aalthough, am sure I wont be using a PC and a PS5 at the same time.
 
TechNickGamer said:
Well, I'm from Hyderabad. I would love to take help if that's really feasible you know?! :D


Any specific model on the PCIE Wi-Fi card with antenna from Amazon ?


I should have mentioned about the TV im using. Its 4k 55" and also used on the same UPS with a Playstation 5. Aalthough, am sure I wont be using a PC and a PS5 at the same time.
Click to expand...
I'm using this as it was on sale for 1600 on tatacliq. But tp-link offerings are equally good too.
 
TechNickGamer said:
Link seems to be not working.
Click to expand...
Check now. Fixed the link.
I

FS: Networking Thread 'Fenvi FV-T919 Wifi Adapter and Tenda AC1200 Wifi Adapter'

Fenvi FV-T919 Wifi Adapter - Rs. 2500/-
  • Comes with all accessories, driver cd and box
  • No low profile bracket
  • Compatible with Hackintosh
  • No invoice and no warranty
Bought from forum member some time back. Specs can be ascertained here.

Tenda AC1200 Adapter - Rs. 1000/-
  • Comes with all accessories, driver cd and box
  • Low profile bracket included
  • Amazon invoice available and in warranty
Bought from Amazon in May 2024.

NOTE :-

POSTS : Please keep the thread clean and seek information / contact via PM only. Please do your...
  • Like
I guess these might be of interest to you.
 
Last edited:
Afxal said:
Check now. Fixed the link.
I

FS: Networking Thread 'Fenvi FV-T919 Wifi Adapter and Tenda AC1200 Wifi Adapter'

Fenvi FV-T919 Wifi Adapter - Rs. 2500/-
  • Comes with all accessories, driver cd and box
  • No low profile bracket
  • Compatible with Hackintosh
  • No invoice and no warranty
Bought from forum member some time back. Specs can be ascertained here.

Tenda AC1200 Adapter - Rs. 1000/-
  • Comes with all accessories, driver cd and box
  • Low profile bracket included
  • Amazon invoice available and in warranty
Bought from Amazon in May 2024.

NOTE :-

POSTS : Please keep the thread clean and seek information / contact via PM only. Please do your...
  • Like
I guess these might be of interest to you.
Click to expand...
Unfortunately no Marketplace for new joiners, Let me see If I can DM him.
 
TechNickGamer said:
1) I never built a PC myself, can I do it myself with DIY videos or is it a Big no for first timers?
Click to expand...
You haven't really built a pc until you do a blood sacrifice by cutting your finger while installing the i/o shield! :P
But for real though, building the pc yourself will down the line help you when you need to troubleshoot or fix any issues that may occur. Take as much help from all of us online but at the end do it yourself, your build will truly be yours, you've yourself have already found and bought the parts, why let someone else help with the finishing! :) All the best. And it is really simple, it's just simple mistakes like front panel connectors that can be a bit confusing
 
There are people in most main cities who do these jobs, their expertise and knowledge varies but hiring one of them could be what you need. If you do not know anyone then you might consider getting in touch with one of the bigger local shops and asking them if they have their own in house person or if they can direct you to one.
 
Decadent_Spectre said:
There are people in most main cities who do these jobs, their expertise and knowledge varies but hiring one of them could be what you need. If you do not know anyone then you might consider getting in touch with one of the bigger local shops and asking them if they have their own in house person or if they can direct you to one.
Click to expand...
I know this place called CTC in Hyderabad which do these stuff with some fee. Its not about the money but I'm fascinated to learn as its the first time but since as it involves some risk while doing it myself and I may not have the tools like Tweezers, sophisticated pliers or Anti static cable as such I was checking things here.
 
TechNickGamer said:
I know this place called CTC in Hyderabad which do these stuff with some fee. Its not about the money but I'm fascinated to learn as its the first time but since as it involves some risk while doing it myself and I may not have the tools like Tweezers, sophisticated pliers or Anti static cable as such I was checking things here.
Click to expand...

If you want to learn then you should do it. If you want an easy and effective way to do the job then hire someone. Enjoy and have at it.
 
1 First of all you install I/o shield
2 Insert HDMI into GPU port not the motherboard
3 Every connection has it's specific connector. Any wrong connector will not fit where it is not meant to be.
4 Download newest windows iso and do fresh install. The windows will update everything automatically don't download or install driver of anything unless it is not working properly.
5 First use the PC for few days without wifi and get pciE if required.
 
Congratulations for a new build and as everyone said do it yourself but go slow, No need to rush if something feels difficult just pause and watch a video for clearance. I would say keep your mobile handy to look at the steps
- first screw your motherboard to cabinet
- install processor, Ram, PSU etc...
- Now comes the slightly difficult part where you have to connect cabinet cables to motherboard, this needs to be done correctly so check the manual before proceeding
now pray to god that everything is right and hit the power button :)
 
Back
Top