Search results

To help you I am ASSUMING 2 things here 1. You have very little knowledge bout upgrading/building pc 2. You want to spend as less as possible to upgrade your pc that's why u are trying to salvage your motherboard So here is my advice --If u wanna salvage your motherboard you can buy a used i7...

Absolutely , most definately yes . You see with 2c/4t on a 1660s u will notice hell a lot of stuttering and frame spikes , uogeading to 7400 will eliminate stuttering relatively but will still be cpu bottlenecked , with 7700 u will get most out of your gpu surely But don't spend a lot on cpu...

You have 2 ways to do this , 1. Wait for a deal on used 7th gen i5 or i7 (non-k) 2. Sell ur b250 and g4560 for like 6-8k and buy a new combo i3-10100f with h410 is good bang for buck for around 12k I3 10100f is good for future upgrades too it can handle upto a 2060super

Ecc rams ? Why u want them on ddr4 gaming setups , ecc is for servers and scientists also it'll give lower fps than regular ram I don't think that ecc rams shud be a reason to choose a motherboard brand

Ryzen 3000 apu doesn't work with a520, get a320 if u have no plans to upgrade ur cpu , if u plan to upgrade get b450

Yeah makes sense but 3070 will be op limit to upgrade with 550 watts. Just tellin that to him cuz he just mentioned rtx 3xxx series The above build with 3070 consumes around 360 watts and with a bronze adjusting for 75% efficiency (just to stay safe) gives around 410 watts . So even with a 50...

Why are u buying new gtx 1650s when u gonna replace it in 6 month , do u plan to use it on a second rig? 2nd hand gpu seems more cost effective to me. Also the above build is perfect but I would go with a 650 watt bronze or 550 watt gold atleast . Also op wanted an 1650s not 1650 I...

Repair what

Getting a xeon cpu is easy the real problem is getting compatible board as new are very expensive , ecc ram and Chinese motherboard are cheap on aliexpress but as of right now there is a huge delay on shipping from China also customs are strict from china

Buying barebones is what I did , got motherboard , i5 3470 , 16gb ram for 4k, bought one antec case for 2300 and 1060 used for 7.5k also bought antec 450 watt psu and assembled it, I had 2 problems though the motherboard align ment was not perfect had to use a kind of contraption to secure the...

Many used Dell optiplex 3010 and 7010 can be bought for under 12k , u can buy one with i5 3470 or similar , these have been used in mnc/offices are are great bang for buck , look for the computer market in your locality that sells used pc, they will have it or check OLX. 12k is for full cabinet...

I want a wifi range extender/repeater

What does op mean?

I have an aopen 24 inch monitor and it's good, been using it for 9 months now , no problem till now , they only con is that it has some what low brightness ,it's enough though not bothersome but lesser than other monitors I have used or seen till now

Buddy way out of context man, he initially asked for *different* ways to compare cpu , he asked for it so here I make sure he gets a fruit basket with them all apples oranges and banana and all of em But then I pointed that it's better compare apples to apples so I told him to compare them on...

U can compare bench marks, fps counters , whateva u want whichever way u want i3 10100f is equal to older gens i7(7 and below) U guys don't understand a very simple thing , intel has a basic architecture for its cpu it's based on a 'ring-bus' config and it has made it's cpu on similar layout...

Repeat after me :- buying used intel 3rd/4/5/6/7 cpu doesn't make sense anymore unless they are very very very hmm verrry cheap I3 10100f (lol oof) for 7.5k = i7 7700 in performance Also old motherboard can die as they have less life as compared to a cpu

I actually believe it's the contrary , if u are a frequent upgrader to your hardware go for ryzen , it's known to support more gens of cpu than blue team .. until now intel has supported only 2 gens of CPUs on a motherboard till now since a long time intel also has a ping-pong cpu gen model so...

If airflow is your concern go for mid tower, matx will have less options for airway management Also for components like yours and Indian weather airflow does matter , Airflow also helps in overclocking if u wish to do it , For dust , use dust mats/filters also the most significant way to...

U are comparing them on wrong parameters my friend , both are 65watt proccy they(full pc) draw max 130 watt from wall(4350 drawing marginally less cuz it's 7nm) and eben the cpu performance(both 4c/8t) is around 5-10 percent ballpark They are only marginally different on basis of cpu and power...