3080 10GB Colorful Vulcan NO SIGNAL!

Hardware & Gaming Graphics Cards & GPUs
1

Hi everyone,

I’m looking for guidance or contacts for repairing a COLORFUL iGame RTX 3080 Vulcan 10GB that has suddenly stopped giving display output.

Issue details:
• GPU powers on, fans spin and RGB lights up
• System boots but there is no signal on display
• Tried multiple cables (HDMI/DP) and monitors
• Tested in another PC as well, same issue
• CMOS reset and BIOS update done
• PSU and motherboard are confirmed working with another GPU

Additional context:
The GPU was removed from the PC, and the PC (without the GPU) was sent to my office. After around 15 days, I reinstalled the GPU and that’s when this no-display issue started. The card was working fine before this.

The card is out of warranty.

If anyone has experience repairing RTX 30-series GPUs, or can recommend a reliable repair technician / service center in India who handles GPU-level repairs (VRAM, power delivery, core issues), please share.

Any diagnostic tips are also welcome.

Thanks in advance.

2

Try cleaning the PCIe pins of the GPU with isopropyl alcohol, if you don’t have that, use eraser and rub to clean, make them shiny and hope for the best.

1 Like
3

First thing to check is if it shows up in Device Manager ?

If you have an iGPU connect the display and check ?
or use another GPU with this in a secondary slot.

So it’s possible the GPU was damaged during transport.

Check for any visible SMDs you can observe damaged , missing ?

4

In case nothing works then see this: