cooler master hyper 212+ vs. noctua nh u12p, which is best ?

PC Hardware & Gaming PC Builds, Modding & Overclocking
1

guys as the summers arrives, cup temps are high like the sun :wink:

so need a suggestion that what is good in performance :-

1> cooler master hyper 212+ in push and pull mod

or

2> noctua NH u12P which is also a dual fan cooler .

like from the price i know hyper 212+ is for Rs. 1900 and a addition fan will cost Rs.450 …
near by Rs.2350 and a thermal paste to which will round up near by rs.2600.

and on the othe hand the noctua nh u12p is for Rs. 2500 and i think the past with it is also good :slight_smile:

so for the performance wise going what is best for amd phenom ii x6 1055t ? :grinning_face_with_smiling_eyes:

if any more below Rs. 3000 plz suggest them o :grinning_face_with_smiling_eyes:

2

I am using the Hyper+ in Push - Pull config using the cooler master 90 CFM fans . Processor is E7500 @ 3.9 , almost a Gigahertz higher that the Normal . Its used for a 24x7 set up . Room temp is 22-23 . With 100% usage , i have never seen the temp going higher than 36-40 degrees under full load .

3

@fenix : bro a dual core and a hexa core is uncomparable for temp and that’s the reason i want to known alternatives for my 1055t :slight_smile:

4

the hyper 212+ comes with thermal paste. and that a good one.

5

@ OP where are u getting Noctua NHU12P SE2 for 2.5 k

Sent from my HTC Desire using Tapatalk

6

Its not a Dual core man , but a core 2 duo . I was trying to give u a fair idea about the cooling of Hyper + . Its a great VFM if combined with Good CFM fans and a great cabinet .

7

If you don’t plan to OC then the Hyper 212+ will suit you even light OC it will perform commendably but don’t ask for miracles, if you want a more heavy duty cooler then go for the Noctua NH U12P.

8

It all depends on the amount of OC you are thinking of doing. If it is more than 3.6Ghz Then the U12P is your best bet. Also, a TRUE with 2 fans comes to around 3k+cost of fans. You might want to check that out too.

9

www.techenclave.com/pc-buying-advice/general-purpose-rig-next-3-years-185958.html

alpha17 : provided the noutca u12p rate ,see his comment.

— Updated Post - Automerged —

@Fenix : no offence but i was saying 2 phycial core vs. 6 phycial core. :slight_smile:

10

Noctua NH-U12P SE2 Costs Rs. 3750 and BTW TheITWares is the authorised dealer of Noctua Products…

11

i don’t know that above is se2 or not :frowning:

12

Golccha played me updated price :ashamed:.

13

@ alpha17 : then whats the real price ??? {end}

now if it’s more then Rs. 3000 so what are other option left for me ???

i need a cooler which can handle 3.8 ghz and 4 ghz but in Rs. 3000.

i was able to put my 1055t at 3.8 ghz stable but the temp were to high :frowning:

14

Hyper 212+ should do.

I’m using an old TRU in push pull and temps are on the borderline at 60. PS - I’m on 3.8Ghz stock voltage.

15

dude hyper 212 in push pull surpasses noctua nh U12P. check this out

Coolermaster Intel LGA775 Final Heatsink Temperature Comparisons - Hyper 212 Plus FrostyTech Review

for hyper 212+ the rise above ambient is only 16 degrees with only one fan as opposed to noctua’s 21 degrees

now u only tell me which is better;)

16

ok if gone with hyper 212+ then how are 2 delta 120 mm fans of 2 Scythe Ultra Kaze 120mm with it :slight_smile:

— Updated Post - Automerged —

or 2 Scythe Slip Stream 120mm

17

Scythe fans do not make good heatsink fans.

The stock blademaster fan that comes with Hyper 212+ is the best for it.

I would suggest getting another one, but you won’t notice that much of a difference if you are just cooling stock.

18

any other option for dual fans which is suitable for hyper 212+ which can keep my 1055t under 60 degree at 4ghz ???

19

yeah use the 90cfm coolermaster fans. its this one

Red LED Silent Fan 120mm - Cooler Master - Leading Provider of Computer Case | Cooler | Power Supply

costs 450 per fan. use two. its available on itwares

TheITWares - One Stop for all Gizmos!COOLER MASTER R4-L2R-20AC-GP 120mm Blue LED Case Fan

20

Just use another blademaster fan. Since you 212+ will already be coming with one, just add another.