My Previous thread got locked due to forum updates and I decided to make a new and updated one.
**
Mouse Switches/Encoder Replacement Service:
**
Mouse Switches Replacement:
After disassembling over 500 mice so far, I have realized the fact that most of the mice come with switches which have a life span of just 20 million clicks and these go faulty very soon. There are other reasons too because of which mouse switches go faulty, like moisture, too much pressure or careless use. In 99% cases replacing these switches resolves problems like switch not working, double clicking switch or any kind or switch related issues. As for the replacement switches, I use the best ones that are available in the market and I have also mentioned them down below. Once replacement switches are installed the mouse becomes practically new and can be used for a long time before these switches go bad. In my experience I have seen after installing aftermarket switches from brands like Huano/Kailh/TTC the mouse works perfectly, even better than how it used to work out of the box thanks to the high quality and high endurance of these new switches. I have replaced switches for a lot of members here and none of them have reported any issues so far after getting new switches installed.
Mouse Encoder Replacement:
Most of the mice still use mechanical encoder for the scroll wheel rotation, unfortunately these are bound to fail one day too and replacing them is the only option in most cases. But once a new scroll encoder is installed all scroll wheel related issues disappear. Scroll encoders come in different sizes and I currently have all the common sizes available in stock.
Keyboard Switches Replacement Service (Applicable for Mechanical Keyboards only):
If you have a mechanical keyboard and there is a problem with any of the switches, it can be resolved by replacing the faulty switch with a new switch.
If someone wants to upgrade, it is possible to replace all the keyboard switches with new switches of your choice. This is mostly worth it for those who have good high-end boards with faulty switches.
PS5/Xbox Series X Controller Stick Drift Problem:
The biggest problem with ps5 dual sense and xbox series x controllers is ‘stick drift’ and it is caused due to the wear inside the potentiometer over the course of time. In order to fix ‘stick drift’ issues completely new hall effect sticks can be installed and these are going to last for a really long time because these use magnets to register the movement unlike the stock potentiometer based sticks which use friction to register the stick movement. Right now I have Ginfull V5s Hall Effect Sticks in stock which are probably the best hall effects for the ps5 dualsense and xbox series x controller.
But if you want some other sticks in your ps5/xbox controller then that can be installed too, you just need to buy it and send it along with the controller.
Terms:
-Product has to be sent to me for any kind of service.
-I have fixed a lot of mice till date but I haven’t damaged a single one so far, still there is always a little chance of messing things up so I don’t take any responsibility for any mess that I might make in the process of repair.
-Just in case I fail to fix the product, the 25% service charge will still be applicable unless it was completely my fault.
-Before sending the repaired product to the owner, I thoroughly check it. But these replacement parts don’t come with any warranty. I still provide 7 days of testing warranty from my side.
-In case of any issues with the repaired product, the product can be sent to me again for just 30% service charge (applicable for just 6 months).
-Service charges don’t include the cost of replacement hardware (unless stated otherwise).
-Service charges vary from brand to brand and from model to model. So, I cannot state a fixed charge that is applicable on all devices.
-If you want to get your product serviced then just DM me the product name and mention the problem you are facing with it and I will let you know the service charges and other details.
