21-30k 27 inch 1440p 144hz Within 25

Status
Not open for further replies.
T

Trdz

Contributor
Hello! Need suggestions for a 27 inch 1440p 144hz
IPS preferred
Mainly Use will be for gaming only and sometime movies
Budget :- Max 25
i have selected two models. Suggest which one to go for or any order alternative which you guys know better within the mentioned budget.
https://www.amazon.in/dp/B07SHPJJZR/ref=cm_sw_r_apan_glt_fabc_X2WN87SSBZDDX840H676
mdcomputers.in

Samsung Odyssey G5 LC27G55TQWWXXL Curved Gaming Monitor

Samsung Odyssey G5 | 27 Inch 2K 144Hz FreeSync Monitor - LC27G55TQWWXXL - FreeSync Premium - VA Panel - Wide Viewing Angles - HDR 10 Supported...
mdcomputers.in mdcomputers.in
 
Trdz said:
Hello! Need suggestions for a 27 inch 1440p 144hz
IPS preferred
Mainly Use will be for gaming only and sometime movies
Budget :- Max 25
i have selected two models. Suggest which one to go for or any order alternative which you guys know better within the mentioned budget.
https://www.amazon.in/dp/B07SHPJJZR/ref=cm_sw_r_apan_glt_fabc_X2WN87SSBZDDX840H676
mdcomputers.in

Samsung Odyssey G5 LC27G55TQWWXXL Curved Gaming Monitor

Samsung Odyssey G5 | 27 Inch 2K 144Hz FreeSync Monitor - LC27G55TQWWXXL - FreeSync Premium - VA Panel - Wide Viewing Angles - HDR 10 Supported...
mdcomputers.in mdcomputers.in
Click to expand...
in 25k I thinks its not possible. best options are va as you your self suggested. the min I saw for your requirement with IPS was 28k or so. found this one for 26k check this out. Acer Nitro VG271U . that's the best you can get.
 
  • Like
Reactions: Trdz

i bought this, its really a fantastic monitor for that price range!! But Beware, there is a DISPLAY PORT TROUBLE shoot, that is BOOT POST will not appear when u connect it to Display Port!!! To explain the problem in simple terms, when DP is connected u will not get access to BIOS screen or BIOS POST, and the machine will hang until u switch off the monitor. so the only solution is to keep the monitor switched off and to wait until the Machine BOOTs up and gets into the OS login screen,

with HDMI it works like charm.

i am still in the process of finding a solution.

I have changed 2 DP premium Cables per se.
 
eTernity2021 said:
i am still in the process of finding a solution.
Click to expand...
Got the solution for DP 2 DP cable problem, it will not work with GPUs with DP that are prior 10xx series, and 10xx series must have a FIRMWARE UPDATE.

for forum discussion Knowledge about the problem,

and the solution

NVIDIA Graphics Firmware Update Tool for DisplayPort 1.3 and 1.4 Displays

Download English (U.S.) drivers for NVIDIA hardware - , , ,
www.nvidia.com

i have used DP cable from

 
nitin_g3 said:
It's VA and does the job, been using since last 1 year. For me the only 'upgrade' to it would be an ultrawide (21:9)

Samsung 27-inch (68.4cm) WQHD Curved Gaming Monitor -Quad HD, 144 Hz Refresh Rate- LC27JG54QQWXXL https://www.amazon.in/dp/B07TZNPHCG/ref=cm_sw_r_apan_glt_fabc_JNVP3ADWCA8GAVZDXWD6
Click to expand...
its Not GSYNC compatible, it has 4ms MRPT , so it will ghost or blur in motion in realtime movements, not good for eyes, VA is ok, but IPS has more color gamut with HDR that's not part of samsung, this is 3 years backwards monitor.

Real Samsung monitors are QLED HDR10+ 1msMRPT are expensive and good line of their brand.
 
eTernity2021 said:
its Not GSYNC compatible, it has 4ms MRPT , so it will ghost or blur in motion in realtime movements, not good for eyes, VA is ok, but IPS has more color gamut with HDR that's not part of samsung, this is 3 years backwards monitor.

Real Samsung monitors are QLED HDR10+ 1msMRPT are expensive and good line of their brand.
Click to expand...
Well, Freesync works fine. Didn't have much budget, so.
 
Status
Not open for further replies.
Top Bottom