Bypassing Jio Fiber Router/ONT -Guide

To people who have switched to TP link XZ000-G3 from Jio's ONT+Router have the speed been stable? I have 1gbps plan and lately the router has been very unstable. I have to use a VPN to get decent speeds.

Dunno if its the Jio ONT or just bad routing in my region.
 
Guys before I invest in this tplink gpon router.l, I want to know from people using it, it working properly?

Also saw this recently uploaded video:

Will this work?
 
Last edited:
ltonlinestore.com

TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store

Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
ltonlinestore.com ltonlinestore.com

This will work. I’m currently using it myself, also purchased from the same website.
 
  • Like
Reactions: AlphaRishi
k_m_Arya said:
ltonlinestore.com

TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store

Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
ltonlinestore.com ltonlinestore.com

This will work. I’m currently using it myself, also purchased from the same website.
Click to expand...
Got it. Just ordered it. I was not sure if I should order from this website or not. Got a lot of reviews that it is a fraud. But since you already got it. I ll purchase it. Thanks.
 
Okay I have successfully bypassed Jio ONT using the provided TP Link XZ000-G3 GPON unit. I have done the following things:
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem

Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
1748615106012.png

AlphaRishi said:
Okay I have successfully bypassed Jio ONT using the provided TP Link XZ000-G3 GPON unit. I have done the following things:
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem

Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
1748615106012.png
Click to expand...
UPDATE: Got it resolved. The issue was dhcp was enabled on the GPON terminal as well, which was causing that issue it seems. Resolved it by disabling that.
Reference steps: https://broadband.forum/threads/how...ssing-the-jiofiber-router.221140/post-1673568
 
Last edited:
  • Like
Reactions: r4hul
Top Bottom