Can h55(lga 1156) platform really support 8gb dimm per slot?

[Pritambb]

Planning for a motherboard with higher ram capacity is this enough?

Zeb H55 - 1156 Socket

Zebronics H55 motherboard with LGA 1156 socket, supports dual-channel DDR3, Intel H55 chipset, 100Mbps LAN, and Micro-ATX form factor.

zebronics.com

I thought only 4gb dimms are supported on this platform but the official zebronics page says their board supports 8gb I know that the controller sits on the cpu but thier are boards which doesn't boot with 8gb dimms like my current motherboard.
Anyone has idea if it they are talking about some special server dimms or normal consumer dimms?

 

[Kiki2024]

Zeb-H55,socket 1156​

SPECIFICATION​

	Supported CPU	Intel Core i7-800/i5-700/i5-600/i3-500 series processors in LGA 1156
	Chipset	Intel 55 Chipset
	Memory supported	2x240-pin DDR3 SDRAM slots memory up to 8GB each slot (total 16GB), supports dual- channel DDR3 1066/1333/ 1600MHz memory
	BIOS	EFII BIOS
	I/O interface	1 x HDMI port, 1 x VGA Port, 6 x USB 2.0 Port, Compatible with USB 1.1, 1 x Rj45 Port, 1 x 3-in-1 Audio (Line In/Line Out/Mic In)
	Onboard interface	1 x 24 pin ATX Power Connector, 1 x 4 Pin ATX 12V Power Connector, 2 x USB Connectors, Supports 4 x USB 2.0, 1 x Front Audio Connector, 1 x Front Panel Connector, 1 x Speaker Connector, 2 x Fan Connectors 3 x Serial ATA Connections Ports
	Integrated LAN	With 10/100Mbps LAN
	Expansion slot	1 x PCI express x16 Slot. 1 x MSATA Port
	Form factor	Micro-ATX
	Country of Origin	China

As per the specification provided from the Zebronics Support page it says that Memory support by this motherboard DDR3 each slots 8GB. I tried to upgrade the RAM DDR3 1333MHz memory on one of the slots, when boot it stuck in welcome page of the OS Windows 10 64bits.

 

[enthusiast29]

I tried to upgrade the RAM DDR3 1333MHz memory on one of the slots, when boot it stuck in welcome page of the OS Windows 10 64bits.​

I tried on a 1st gen laptop too a long while back. I was able to boot into BIOS and do stuff but on loading Windows it got stuck on spinning dots.

 

[Arjun]

.

 

[Pritambb]

The motherboard died after the day it arrived so could not check the dimms .Thanks for the information everyone.