Case fan setup

[irfanrafeeq88]

[font=Verdana, Arial, sans-serif, Helvetica]

Hello guys,

I have a Cooler master hyper 212 plus paired with Cooler Master Xtraflow fans in push/pull with my Phenom II x4. I also have a Corsair Carbide 400R case with the following fans:

1 120mm CM Blademaster PWM fan (21.2 - 76.8 CFM)

1 120mm Scythe Slipstream 1900 RPM fan (110 CFM)

4 120mm Cooler Master Blue LED 90 CFM fans

3 Corsair 44.2 CFM fans

Please let me know which fans should be setup as intakes and which ones as exhausts for an ideal airflow inside my case. ​

[/font]

[font=Verdana, Arial, sans-serif, Helvetica]

------------------------------​

[/font]

 

[irfanrafeeq88]

Hello guys,

I have a Cooler master hyper 212 plus paired with Cooler Master Xtraflow fans in push/pull with my Phenom II x4. I also have a Corsair Carbide 400R case with the following fans:

1 120mm CM Blademaster PWM fan (21.2 - 76.8 CFM)

1 120mm Scythe Slipstream 1900 RPM fan (110 CFM)

4 120mm Cooler Master Blue LED 90 CFM fans

3 Corsair 44.2 CFM fans

Please let me know which fans should be setup as intakes and which ones as exhausts for an ideal airflow inside my case. ​

[font=Verdana, Arial, sans-serif, Helvetica]------------------------------[/font]​

Well I expected atleast some kind of a reply!!!!!!!!!!! Strange

 

[Jarod]

Do you want minimum dust? then intake CFM (with filters) > exhaust CFM

Do you want max cooling? then exhaust CFM > intake CFM

Do you want max cooling for specific components? eg. hard disk, then you can put your max cfm fan in the fan placeholder in front of your hard disk.

Are you using fan controllers? Are fan speeds being varied or running at 100%?

Can you draw a pic of the layout of your components and the location of fan holders?

Have you measured effect of fans on component temperatures? Do you need so many fans?

Well I expected atleast some of these details in the first post!! Strange

There is no ideal airflow, only what is ideal for your requirements.

 

[irfanrafeeq88]

Thank you. I got my answer. Please close this topic Moderator.

 

[aman.pitbull]

Hello guys,

I have a Cooler master hyper 212 plus paired with Cooler Master Xtraflow fans in push/pull with my Phenom II x4. I also have a Corsair Carbide 400R case with the following fans:

1 120mm CM Blademaster PWM fan (21.2 - 76.8 CFM)

1 120mm Scythe Slipstream 1900 RPM fan (110 CFM)

4 120mm Cooler Master Blue LED 90 CFM fans

3 Corsair 44.2 CFM fans

Please let me know which fans should be setup as intakes and which ones as exhausts for an ideal airflow inside my case. ​

[font=Verdana, Arial, sans-serif, Helvetica]------------------------------[/font]​

Front Intake :

1 X 120mm Scythe Slipstream 1900 RPM fan (110 CFM)

1 X 120mm Cooler Master Blue LED 90 CFM fans

Side Intake :

2 x 120mm Cooler Master Blue LED 90 CFM fans

Bottom Intake :

1 X Corsair 44.2 CFM fan

Rest all exhaust :

1 X 120mm CM Blademaster PWM fan (21.2 - 76.8 CFM) UPPER Exhaust away from CPU Heat Sink

1 X 120mm Corsair 44.2 CFM fan

1 X 120mm Cooler Master Blue LED 90 CFM fan REAR Exhaust