hi, can any one please explain me how to connect and configure shdsl lan extenders in a network using terminal emulation program / hyper terminal.
connect and configure G.SHDSL 1504G lan extenders
- Thread starter raghunath77
- Start date
- Status
cisco_tech
Herald
its D-LINK G.SHDSL. i want to connect them one at central office and the other at remote location using telephone cable. distance between them is 2 km.
cisco_tech
Herald
I assume that you have already two wires (one pair) from end to end. which BSNL/VSNL provides.
In your case, i believe both location falls in same exchange, so it will be with minimal cost.
couldnt able to find manuals abt your device.
But it has web-based gui as well as CLI .
For CLI u can connect it in Hyper Terminal via RS-232.
Default setting should be 9600, 8, none, 1, None.
i would definitely try to help further if you stuck anywhere .
Thanx
In your case, i believe both location falls in same exchange, so it will be with minimal cost.
couldnt able to find manuals abt your device.
But it has web-based gui as well as CLI .
For CLI u can connect it in Hyper Terminal via RS-232.
Default setting should be 9600, 8, none, 1, None.
i would definitely try to help further if you stuck anywhere .
Thanx
- Status