CPU/Mobo cpu clock speeds varying

Status
Not open for further replies.
T

techmaster

Contributor
i have pcchips m748lmrt motherboard.i am using a p3 550 Mhz processor as the bios shows but when i enter windows the core speed is 350 Mhz multiplier is set to 5.5 now this speed is not constant it keeps on varying it drops to 0 then it's back to 350 Mhz but it never touches 550 Mhz.

ok now i have changed the fsb to 100 mhz from 66 mhz so now the speed touches 550 Mhz but the problem is it still keeps on dropping to 0 mhz.
 
Strange , didnt knew that PIII had cool n quiet technology.
In AMD when that is activated the speed keeps on varying to reduce temps.
 
use CPU-Z from www.cpuid.com and tell what speed it is reporting...

I once bought a P3 1.3GHz..was written 1.3 on the IHS..bios showed 1.3GHz...windows and CPU-Z showed a Celery 433MHz :S with mendocino core....lol..used it on my old P3 board, showed celery 433 in the BIOS...so watch out..;)
 
SunnyBoi said:
use CPU-Z from www.cpuid.com and tell what speed it is reporting...

I once bought a P3 1.3GHz..was written 1.3 on the IHS..bios showed 1.3GHz...windows and CPU-Z showed a Celery 433MHz :S with mendocino core....lol..used it on my old P3 board, showed celery 433 in the BIOS...so watch out..;)
Click to expand...

i am using the latest version of cpu-z...
Also i cannot upload screenshots else i would have shown the screenshots with 0 mhz and 550 mhz.......
 
dunno i tried to upload the screenshots which were jpeg image file around 120k total it said error uploading file.....tried it couple of times
 
techmaster said:
dunno i tried to upload the screenshots which were jpeg image file around 120k total it said error uploading file.....tried it couple of times
Click to expand...
it seems worst problem than wat u was having before .... ;)
 
@tech : use imageshack..

there is nooo way the comp will run at 0MHz :S
 
Last edited by a moderator:
Status
Not open for further replies.
Top Bottom