Crysis 2 major texture bug

Status
Not open for further replies.

parasharenator

Contributor
While playing Second Chance , when Armor mode has to be activated, there I no see no staircase just white spheres which I can't climb because I cant jump that high, Iam stuck.
Texures/Field of View are very bad with buildings and water coinciding.
I tried reducing the difficulty from post human warrior to other nothing changed and then reducing graphics settings , still no change.
Because of the glitch can't move forward.
Check the screenshots:
opbh2w.jpg

and
33m5pva.jpg


Note: I have the latest drivers for my GPU & latest directx.
 
asingh said:
Did you try with lower screen resolution. Also try 10.5 CCC drives.

Iam having Win7 x64 bit-if that matters.

I had 10.x ccc drivers and then downloaded latest drivers when this issue cropped up. Wasted like 3 hours for this and tried everything^^^ but no change. Finally uninstalling the game!

game was running with no stutter at 1680x1050 resolution , also the FPS were always above 30.

Apart from this checkpoint when he opens the door to the city after performing two silent kills, the textures are absurd with seriously shitty Field of View(tried increasing through the console but no matter what graphics settings i try to increase -visually nothing seems to change). In some place even though there's a path,, i can't move forward and then the above mentioned screen shot which stopped me from progressing.

I haven't seen such bad piece of rendering in any game before, even in GTAIV 's known texture issues but a reload would usually fix it. and crysis series was supposed to be poster boy of pc gaming, duh!
 
Sorry to hear this. With 64BIT OS should not cause an issue at all. Probably the most you can do, is pick a saved game file and skip this part.
 
asingh said:
Sorry to hear this. With 64BIT OS should not cause an issue at all. Probably the most you can do, is pick a saved game file and skip this part.

I uninstalled ccc 11.3(latest) and installed 10.5(as u had suggested), after that system in general feels laggy..

Then, I was uninstalling crysis2 and it became unresponsive and there was a background dialog saying do you want to cancel the uninstall and I said No and now the game doesn't feature in Installed programs in Programs &features under Control Panel. Now I don't have patience to remove the registries manually and delete the folder even though the process would take like 10-15 minutes, is there easier way to uninstall?

And regarding skipping the part: Downloaded game saves and that checkpoint still renders as in above screen shot. skipped the checkpoint, but then playing at difficulty level of Post Human Warrior to Recruit(which doesn't have any option to higher the difficulty) in the downloaded Game saves is too big a fall.

I would rather skip the Game till Crytek comes out with a DirectX 10/11 "patch".

--- Updated Post - Automerged ---

Could it be possible that there's something wrong with my graphics card or it's drivers.

Following are the sequence of events:

1.) I was using 10.x (i suppose x>5) CCC drivers and then the above mentioned Crysis 2 bug happened.

2.) I downloaded latest CCC , 11.3 - still the issue persisted and the CCC2 was showing GPU temperature above 70 degrees( would post exact if needed).

Then I was watching some videos on youtube and I got an error message something like-" your ATi display driver just recovered from a crash) and said video was playing with green background.And I had to restart the browser to watch the video.

3.) Then i uninstalled 11.3 completely and installed CCC 10.5 as per asingh's advice. but game glitch didn't change irrespective of whatever i tried.

Then again, I was watching some videos when one of the video went Green and I got same error message like-" your ATi display driver just recovered from a crash"

And so I restarted the browser, only to find out that this time the whole System became unresponsive(Hung-up) and had to manually reboot the computer.

Now, I have seen my display driver crash some times, when playing 1 or 2 games but never ever it crashed,leave alone System Hang- while Youtubing .

What could be the possible implications---I am being cautious because when BSOD errors used to happen quite frequently last year, my RAMs and Motherboard were at fault and had to get them replaced.
 
Do you get weird texture issues with other games also..?

Try this. Go to guru3d and search out driver sweeper. As per the listing clean out your drivers. Get it to a point where in hardware you display driver is seen as a generic PnP device adapter by windows. Then mount 10.5, and the CAP which you PM'ed me about.
 
asingh said:
Do you get weird texture issues with other games also..?

Try this. Go to guru3d and search out driver sweeper. As per the listing clean out your drivers. Get it to a point where in hardware you display driver is seen as a generic PnP device adapter by windows. Then mount 10.5, and the CAP which you PM'ed me about.

No, I don't get weird textures with other games. Last game I played was bulletstorm.

Downloaded driver sweeper, cleaned all ati drivers , installed 10.5 ccc and then the CAP, then creating my own custom profile for crysis2.exe with basics, nothing changed.
jojothedragon said:
Did you try applying the 1.2 patch ?

tried 1.1 and 1.2.
 
Darn..! Yours is a difficult case.

Okay, last shot. Download RadeonPRO from the link. It is quite easy to understand. Set up the profile for Crysis 2 so that under TWEAKS "Force XfireX profile" select Bioshock. Also using this same tool keep vsync OFF. I know you do not have multi-GPU but this works. If by tomorrow no one can crack this here, will open a thread on guru3d.

Try it out.
 
asingh said:
Darn..! Yours is a difficult case.

Okay, last shot. Download RadeonPRO from the link. It is quite easy to understand. Set up the profile for Crysis 2 so that under TWEAKS "Force XfireX profile" select Bioshock. Also using this same tool keep vsync OFF. I know you do not have multi-GPU but this works. If by tomorrow no one can crack this here, will open a thread on guru3d.

Try it out.

Yes I installed Radeon Pro and then only used the 10.5 CAP .

Are you mentioning to create a custom CAP for crysis2 for CCC 10.5 and check the options that you mentioned.

OR

should I download CAP for CCC 11.3 as renaming crysis2.exe to fear.exe helps in fixing flickering on Multi-GPU?

BTW, I have already opened a thread on guru3d.
 
Status
Not open for further replies.