Fan for Hyper 212

how much airflow does your current fan provide?...choose according to the cfm and the noise over your current fan.
btw which one is it?..
 
Um I dunno. The TC said that his fan was a 1200RPM version and so I posted that its CFM would be around 40 - 45 :)

Perhaps CM packaged a lower RPM fan or maybe his fan is reporting its RPM incorrectly in the BIOS ....

--- Updated Post - Automerged ---

This is probably a stock CM fan (I have one of these too) -
Theitdepot - Cooler Master Blade Master 120mm Fan (R4-BMBS-20PK-R0)

If (according to the specs) -
600RPM - 20CFM
2000RPM - 90CFM

Therefore 1200RPM is around 40 - 45 CFM.... *bows* :P
 
The bundled fan is a blade master 2000 RPM fan. But you can use the fan that you have shown in the link. But automatic CPU fan speed control won't be available with this fan since it is a cabinet fan and not a CPU fan. CPU fan has 4 pins, the additional one for pulse control. Any 120mm X 25mm fan can be used but controlling the speed maaybe a problem and it may run only at the fastest speed unless you use a fan controller.
 
I would say do not mismatch. Go with the Cooler master Blademaster fan which comes originally with hyper 212. If you are looking for a used one, PM me
 
Don't use a cheap 1200 RPM fan along with the Hyper 212+ better get the 2000 RPM LED fans available they are silent, light up your interiors and are great VFM at 450 a piece ( atleast here in Bangalore that is the price Golccha ). The BladeMaster is another option but a bit noisy and expensive compared to what I mentioned.
 
The 1200 RM fan from Coolermaster is a 31 cfm and they are hopeless.. The ones that you are asking for have fantastic airflow, but will always run on the max rpm... And the noise levels are pretty acceptable, I have 3 in the cabinet and 4th as the secondary on Hyper 212 plus...

And i forgot yes, they can be used on the Hyper 212...
 
Ok. I got a Delta AFB1212HHE 2900 RPM 120 cfm 3 pin type - from Dominator - In the BIOS i set CPU fan control @ 62.5% and it running @ 2086 RPM, : Pleased with it
 
Back
Top