tirthankar
Adept
Finally received my 120 mm fan to mount on the TR Si-128..thanx to Abhisek aka ANP..
its a delta, supposedly pushes a rocking 110 cfm..
dropped my temps from 44-53 to 37-43, load after 15 mins of prime..hyeah:
obviously i immediately sat down to test how much this cooler could take, with some oc'ing..
dropped ram speed to 200, htt to 3x and multi to 6x, and started pushing the fsb till it went all the way to 300..at 1.35 vcore and the load temps didnt increase a single degree :O..stayed rock solid at 43, though the idle increased to 39.
next i started playing around with the multi and as it crossed 2 ghz i had to give li'l voltage..it went upto 2.4 with 1.37 vcore, load temps being 44
right now i' m priming at 2.65 ghz, 9*295, 1.39 vcore.
load temps are at 47, ambient around 35
here's a cpu-z screenie
only one thing, this fan does not have flat screw holes at the inner edges, but it is slightly raised..see the pic
as a result, my mounting clips are not getting into the holes ( though i dont know if it's supposed to, just thought it might be:bleh: )
should i be worried about my fan slipping?
its a delta, supposedly pushes a rocking 110 cfm..
dropped my temps from 44-53 to 37-43, load after 15 mins of prime..hyeah:
obviously i immediately sat down to test how much this cooler could take, with some oc'ing..
dropped ram speed to 200, htt to 3x and multi to 6x, and started pushing the fsb till it went all the way to 300..at 1.35 vcore and the load temps didnt increase a single degree :O..stayed rock solid at 43, though the idle increased to 39.
next i started playing around with the multi and as it crossed 2 ghz i had to give li'l voltage..it went upto 2.4 with 1.37 vcore, load temps being 44
right now i' m priming at 2.65 ghz, 9*295, 1.39 vcore.
load temps are at 47, ambient around 35
here's a cpu-z screenie
only one thing, this fan does not have flat screw holes at the inner edges, but it is slightly raised..see the pic
as a result, my mounting clips are not getting into the holes ( though i dont know if it's supposed to, just thought it might be:bleh: )
should i be worried about my fan slipping?