I have the following Combo For sale
1) 3000+ venice core AMD64 Cpu. (Slightly used)
This chip will be delivered to me in the next 2 days, it was bought originally in august-sept ,05. so warranty of 2 1/2 years is confirmed. will give with the original bill of purchase. Stepping unknown as of now.
2) Foxxcon Winfast NF4XK8MC mATX Format m/b. (New, just used for Recent testing...) , Warranty 3 months (personal)
http://www.foxconnchannel.com/products_motherboard_2.cfm?pName=NF4XK8MC-RS European Model
It is a nf4 - 4x chipset m/b. althought it may not be top of the line overcloker but it is rock solid and very stable. in terms of stable operation and performance it is as good as any of the top of the line m/b's from co's like Asus, Msi, DFI etc...
Pros:
1) Slightly overclockable, the cpu fsb can be set upto 250 mhz in 1 mhz step.
2) Lots of Memory dividers present. ability to manuslly set the memory frequency and the latency and other timings....
3)Has onboard 10/100mb Lan, 4 Sata , 5.1 sound. supports Raid.
1 x PCI Express x16, 1 x PCI Express x1, 2 x PCI,
4)Good quality components used , especially the power capacitors.
5) Runs nearly all the socket 939 cpu's.
Cons:
1) The temperature and voltage (12V only) readings are screwed up.
2) limited o/cability (only upto 250 mhz cpu fsb )
3) The Voltages Vcore, Vdimm, etc cannot be adjusted unless you do the voltmods....
4)Only 2 Dimms sockets. , (but the memory runs dual channel)
NB: recently i had the oppurtunity to test 4 3000+ venice core cpu's on this m/b. the steppings / Datecode ranged from the coveted 0517 to 0539 , all of them ran flawlessly at 250 mhz i.e. 2.250 Ghz speed. did semi-extensive testing on all of them memtest, prime95, superpi etc...and all passed without errors.
The Everest read scores with twinmos cl3 memory (Elpida)
at a setting of 3-3-3-7 @ 204 mhz , cpu @ 250 is around 5500 ~ 5600.
3) Xfx 6600 , pci-e , 128mb, 128bit graphics card. (Brand New, Unused, Box packed ) Model PV-T43P-NA
Warranty 3 months (personal).
http://www.xfxforce.com/web/product/listConfigurationDetails.jspa?productConfigurationId=953
This card has default speed of 275 / 650 mhz....but can be easily o/c to 525 ~ 540 mhz level on core and 675 ~ 690Mhz on memory. memory is Hynix DDR 3.3ns (-33)
Even at such o/c levels the h/s stays surprisingly and relatively pretty cool. (Not Hot).
3D mark05 scores i get from 3100 ~ 3400+ (depending upon the system memory speed , i.e. which ram is used. latency used etc..., cpu was at constant 250 mhz.
your mileage may vary depending upon your system configuration.
Now i have seen here on TE Guys who have 6600GT are getting scores ranging from 3300~3400 (QF ) non overclocked to 4000+ (Saiyan) extremely overclocked.
so lets asume the average score of 6600GT would be around 3800 3dmark05 for a pci-e 6600GT card which costs anywhere between 8 ~ 9.2K.!!!!:no:
ps: if the purchaser sends me his memory modules i can set and optimise the setup as per his memory and despatch.
Expected Price: 12,000 + Shipping. (Not negotiable)
In lieu of xfx 6600 gfx card i can Give Leadtek Winfast PX6200TC pci-e card with 16 mb onboard, support 128mb
Brand new for the combo price of Rs. 10,000/- + Shipping.
1) 3000+ venice core AMD64 Cpu. (Slightly used)
This chip will be delivered to me in the next 2 days, it was bought originally in august-sept ,05. so warranty of 2 1/2 years is confirmed. will give with the original bill of purchase. Stepping unknown as of now.
2) Foxxcon Winfast NF4XK8MC mATX Format m/b. (New, just used for Recent testing...) , Warranty 3 months (personal)
http://www.foxconnchannel.com/products_motherboard_2.cfm?pName=NF4XK8MC-RS European Model
It is a nf4 - 4x chipset m/b. althought it may not be top of the line overcloker but it is rock solid and very stable. in terms of stable operation and performance it is as good as any of the top of the line m/b's from co's like Asus, Msi, DFI etc...
Pros:
1) Slightly overclockable, the cpu fsb can be set upto 250 mhz in 1 mhz step.
2) Lots of Memory dividers present. ability to manuslly set the memory frequency and the latency and other timings....
3)Has onboard 10/100mb Lan, 4 Sata , 5.1 sound. supports Raid.
1 x PCI Express x16, 1 x PCI Express x1, 2 x PCI,
4)Good quality components used , especially the power capacitors.
5) Runs nearly all the socket 939 cpu's.
Cons:
1) The temperature and voltage (12V only) readings are screwed up.
2) limited o/cability (only upto 250 mhz cpu fsb )
3) The Voltages Vcore, Vdimm, etc cannot be adjusted unless you do the voltmods....
4)Only 2 Dimms sockets. , (but the memory runs dual channel)
NB: recently i had the oppurtunity to test 4 3000+ venice core cpu's on this m/b. the steppings / Datecode ranged from the coveted 0517 to 0539 , all of them ran flawlessly at 250 mhz i.e. 2.250 Ghz speed. did semi-extensive testing on all of them memtest, prime95, superpi etc...and all passed without errors.
The Everest read scores with twinmos cl3 memory (Elpida)
at a setting of 3-3-3-7 @ 204 mhz , cpu @ 250 is around 5500 ~ 5600.
3) Xfx 6600 , pci-e , 128mb, 128bit graphics card. (Brand New, Unused, Box packed ) Model PV-T43P-NA
Warranty 3 months (personal).
http://www.xfxforce.com/web/product/listConfigurationDetails.jspa?productConfigurationId=953
This card has default speed of 275 / 650 mhz....but can be easily o/c to 525 ~ 540 mhz level on core and 675 ~ 690Mhz on memory. memory is Hynix DDR 3.3ns (-33)
Even at such o/c levels the h/s stays surprisingly and relatively pretty cool. (Not Hot).
3D mark05 scores i get from 3100 ~ 3400+ (depending upon the system memory speed , i.e. which ram is used. latency used etc..., cpu was at constant 250 mhz.
your mileage may vary depending upon your system configuration.
Now i have seen here on TE Guys who have 6600GT are getting scores ranging from 3300~3400 (QF ) non overclocked to 4000+ (Saiyan) extremely overclocked.
so lets asume the average score of 6600GT would be around 3800 3dmark05 for a pci-e 6600GT card which costs anywhere between 8 ~ 9.2K.!!!!:no:
ps: if the purchaser sends me his memory modules i can set and optimise the setup as per his memory and despatch.
Expected Price: 12,000 + Shipping. (Not negotiable)
In lieu of xfx 6600 gfx card i can Give Leadtek Winfast PX6200TC pci-e card with 16 mb onboard, support 128mb
Brand new for the combo price of Rs. 10,000/- + Shipping.
...
whatever it is .....
hyeah: :hug: 
