vishal2005
Contributor
I bought a transcend 35u enclosure with seagate 1tb 7200.12 hard drive. Installed the drive in the casing according to the manual & connected to pc via usb port since motherboard not having e-sata port. Powered on the enclosure , fan runs on enclosure but hard disk does not gets detected. Does not show in device manager , disk managment or acronis disk director. Connected the hard drive without enclosure to sata port and gets detected so there is no problem with hard disk.
So the hard disk not might be connected well in the enclosure. Also i could only use 2 screws to secure the drive in casing since the other two holes on drive were not in alignment with the casing holes. But the drives power connecter and sata connecter gets aligned with casing's connectors.
Do not know what to do now. Need ur help.
So the hard disk not might be connected well in the enclosure. Also i could only use 2 screws to secure the drive in casing since the other two holes on drive were not in alignment with the casing holes. But the drives power connecter and sata connecter gets aligned with casing's connectors.
Do not know what to do now. Need ur help.