CPU/Mobo Help with Pioneer DVR-107D

Status
Not open for further replies.
Rave

Rave

Forerunner
This is of my friend, broungt it for backing up some data, but giving me strange problems

first off, it showed a DVD +R with data written on it as a CD :S

and even an empty media +R as a CD
it worked fine at my friends place, the same brand empty media i mean, didnt try the written DVD though

so flashed the firmware to 1.21 but it still shows the samething..

someone please halp!
 
^Rave, sorry I wasn't on MSN too much..
Which burning software are you using? Try Nero, Windows' built in burning software will NOT work with blank DVDs.
 
ok, was able to urn a DVD, but after burning, the dvd is just dosent recognised, when i double click the dvd drive, i get a blank page, duhh....

this intex sux, and a good quality media is 15 kms away.... :O

any troubleshooting for the same? to read what i just wrote in that dvd lol...
 
yea i know but as i said a good media is literally miles away, hehe

but this writer is also POS, or am i wrong....
 
ok burned 3 moser Baer and 2 of these died, and got these cheap media and this one died as well, and all had the same error AFAIR

Rave

King of Ze Worldz

5C82001080000000008666291792

Windows XP 5.1

IA32

WinAspi: -

ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/25/2005 7:11:20 PM

NT-SPTI used

Nero Version: 7.0.0.0

Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.21 - HA 1 TA 0 - 7.0.0.0

Adapter driver: <IDE> HA 1

Drive buffer : 2000kB

Bus Type : default (0) -> ATAPI, detected: ?

CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.0.0

Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===

CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347ss Port 0 ID 0 DMA: Off

DiskPeripheral : SAMSUNG SP0802N nvatabus Port 1 ID 0 DMA: Off

CdRomPeripheral : PIONEER DVD-RW DVR-107D nvatabus Port 1 ID 3 DMA: Off

=== CDRom-Device-Map ===

PIONEER DVD-RW DVR-107D G: CDRom0

SCSIVAX DVD/CD-ROM H: CDRom1

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

ShowDrvBufStat : 0

BUFE : 0

Physical memory : 1023MB (1048052kB)

Free physical memory: 298MB (305808kB)

Memory in use : 70 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

14.3.2006

ISO compilation

7:37:47 PM #1 Text 0 File Isodoc.cpp, Line 6410

Iso document burn settings

------------------------------------------

Determine maximum speed : FALSE

Simulate : FALSE

Write : TRUE

Finalize CD : TRUE

Multisession : TRUE

Multisession type: : Continue multisession

Burning mode : DAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE
7:37:47 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525

ReadBuffer-Pipe got 262144KB of Memory
7:37:47 PM #3 Text 0 File Reader.cpp, Line 124

Reader running
7:37:47 PM #4 Text 0 File Writer.cpp, Line 113

Writer G: PIONEER DVD-RW DVR-107D running
7:37:47 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304

First writeable address = 0 (0x00000000)
7:37:47 PM #6 Text 0 File Burncd.cpp, Line 3301

Turn on Disc-At-Once, using DVD media
7:37:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 277

Last possible write address on media: 2295103 (510:01.28, 4482MB)

Last address to be written: 2192479 (487:13.04, 4282MB)
7:37:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 289

Write in overburning mode: NO (enabled: CD)
7:37:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568

Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD+R

Disc Manufacturer ID: VDSPMSAB, Media Type ID: 001, Product revision number: 1

Disc Application Code: 0, Extended Information Indicators: 1
7:37:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 456

>>> Protocol of DlgWaitCD activities: <<<

=========================================
7:37:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 2192480 (2192480) = #2192480/487:13.5

relocatable, disc pos for caching/writing not required/ required, no patch infos

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2192480 blocks [G: PIONEER DVD-RW DVR-107D]

--------------------------------------------------------------
7:37:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058

Prepare recorder [G: PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1:

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4490199040, ISRC ""

DAO layout:

===========

__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________

0 | lead-in | 0 | 0x41 | 0x00

0 | 1 | 0 | 0x41 | 0x00

0 | 1 | 1 | 0x41 | 0x00

2192480 | lead-out | 1 | 0x41 | 0x00
7:37:47 PM #13 Text 0 File SCSIPassThrough.cpp, Line 34

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:37:47 PM #14 Phase 24 File dlgbrnst.cpp, Line 1724

Caching of files started
7:37:47 PM #15 Text 0 File Burncd.cpp, Line 4129

Cache writing successful.
7:37:47 PM #16 Phase 25 File dlgbrnst.cpp, Line 1724

Caching of files completed
7:37:47 PM #17 Phase 36 File dlgbrnst.cpp, Line 1724

Burn process started at 8x (11,080 KB/s)
7:37:47 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:37:47 PM #19 Text 0 File Cdrdrv.cpp, Line 8385

---- DVD Structure: Physical Format Information (00h) ----

Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD+R (10), Part Version: 1.0x (1)

Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Physical Sector Number of Data Area: 26053F h

End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)

Data in Burst Cutting Area (BCA) does not exist

Disc Application Code: 0 / 0 h

Extended Information indicators: 1 h

Disc Manufacturer ID: VDSPMSAB

Media type ID: 001

Product revision number: 1

Number of Physical format information bytes in use in ADIP up to byte 63: 56

Media Specific [16..63]:

00 00 01 56 44 53 50 4D - 53 41 42 30 30 31 01 38 ...VDSPMSAB001.8

23 54 37 0C 00 50 6C 00 - AA 66 17 17 0B 0B 09 09 #T7..Pl..f......

00 1A 1B 0B 0B 0E 0F 00 - 00 00 00 00 00 00 00 00 ................
7:37:47 PM #20 Text 0 File DVDPlusRW.cpp, Line 666

Start write address at LBA 0

DVD high compatibility mode: Yes
7:37:53 PM #21 Text 0 File Cdrdrv.cpp, Line 1195

19:37:53.125 - G: PIONEER DVD-RW DVR-107D : Queue again later
7:38:08 PM #22 SPTI -1106 File SCSIPassThrough.cpp, Line 306

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00

Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 73 03

Buffer x03370000: Len x10000

0xAF 10 C6 4E 7B 92 21 04 74 F4 E5 E0 96 F1 4B A3

0x06 F4 F3 E0 B8 2B 49 9E 09 AE 8C 80 1A 62 52 8D

0x8A 81 20 15 E6 8E BA 78 DE 83 45 E2 AA 2D 79 65
7:38:08 PM #23 CDR -1106 File Writer.cpp, Line 302

Power calibration error

G: PIONEER DVD-RW DVR-107D
7:38:08 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion
7:38:08 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222

conversion idle, stopping reader
7:38:24 PM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 306

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00

Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 73 03
7:38:50 PM #27 SPTI -1104 File SCSIPassThrough.cpp, Line 306

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1104)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x15

Sense Qual: 0x02

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Area: 0x71 00 03 FF FD 00 10 0E 00 00 00 00 15 02

Buffer x03807c00: Len x20
7:38:50 PM #28 Phase 127 File dlgbrnst.cpp, Line 1724

Generating DVD high compatibility borders
7:38:50 PM #29 CDR -1122 File WriterStatus.cpp, Line 167

Unable to recover TOC

G: PIONEER DVD-RW DVR-107D
7:38:50 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167

Could not perform end of Disc-at-once
7:38:50 PM #31 Phase 38 File dlgbrnst.cpp, Line 1724

Burn process failed at 8x (11,080 KB/s)
Existing drivers:

File 'Drivers\PXHELP20.SYS': Ver=2.03.02a, size=19840 bytes, created 8/10/2004 3:39:56 AM (Prassi/Veritas driver for win 2K)

File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/25/2005 7:11:20 PM (InCD4 driver for win NT/2K/XP)

File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 5:30:00 PM (Adapter driver for src)

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Click to expand...

any help?? am out of hdd space :(
 
Try a different/new IDE cable - best would be a try a 80 pin cable and see if the error goes.

Edit : Update your firmware. Also, try burning at lower speeds - see if it burns.

One more reason can be insufficent power/poor psu.

Rave check this - so try updating f/w

DVD burners optimize their ability to write to different brands of DVDs by internal "write strategies" that control the laser power and pulse settings to maximize its accuracy with each different dye formula, reflector density and plastic doping chemistry for each brand of blank DVD disc.

When a disc is inserted, the drive reads the factory media ID off the disc and queries its internal list of known disc brands and write strategies. If the disc is listed, then it uses the write strategy for that disc.

If a write strategy for a particular disc brand is not present in the drive's firmware, it tries to estimate how best to write to the disc by writing to the small re-writable "power calibration" area on each unknown disc type to see which power setting might produce best results for the unknown disc brand.

In some cases, the firmware is unable to produce reliable burning with a particular disc brand, and rejects the disc as having a "power calibration error" or "illegal disc" or a similar error. This error is generally not related to disc quality issues, but is simply a result of the drive not having the latest firmware in it that lists the particular disc brand.

From time to time, drive makers test additional brands of DVD discs and then update their firmware with new write strategies for those newly tested discs, enabling their drives to work with more brands of DVD discs.
Click to expand...

This is from pioneers site

What is Power Calibration error.

A power calibration error is caused by the inability of a DVD-RW drive to use a DVD-R or DVD-RW disk.

DVD-R and DVD-RW disks themselves have information written on them, within this Media ID code there is information that the drive uses to calibrate itself to the disk, when a drive first starts to write to a disk it will burn a small amount of data to a calibration area on the disc, using the calibration information in the Media ID code, and then try to read back the data that it has written. If it cannot be read, then disk will be ejected and fail with a power calibration error.

A power calibration error is normally caused by problems with the media. Should you be experiencing problems with your drive or the media, we recommend that a disk from a good quality manufacturer be used to test it.

For fault finding purposes we recommend the use of a disk of a known high quality, we recommend disks from:

Pioneer Video Corporation

TDK Corporation

Hitachi Maxell

Mitsubishi Chemical Corporation (Verbatim)

Taiyo-Yuden Co. LTD

Matsushita Electric

Industrial Co.,LTD (Panasonic)

Sony Corporation
Click to expand...
 
well will try a different cable when i reboot, but its a problem since all the extra cablers are hidden, hehe, and am using an 80 pin connector only and updated to the latest official firmware as well

does buring the media at more that its proposed speed give this error as well, though this thing has 8x written on it, i think its more or less 4x or 6x type of media, well how? coz i just turned it around and read the fine print on the disk, some code name and 4x written on it lol... so maybe this is causing the problem? or perhaps now lol coz even the MB media crapped out

ok things to try out

Diff IDE cable

and how to enable dma?

and i some how feel i am getting this problem after i updated my firmware, how do i flash back to an older firmware? or this may not be the case?? :S
 
^ about DMA(assuming XP) - go to device manager/ide controllers/parallel ata controllers/secondary channel - look for dvdrw and check if its ultra dma 2 or multi word dma 2 - if it is, its fine.

about f/w - i dont think updating f/w can cause the problem.

Also if the writer was working fine before and only stopped working now then, clean the cd/dvd lense and try.

OR finally - can be a hardware failure, get it serviced.
 
Intex media is the worst - it made grinding noises in the half way of burning. I had to switch the power off from the electric socket, and throw the media out.
Anything by intex sucks.
 
Status
Not open for further replies.
Top Bottom