1. Open the "Router page" (192.168.1.1)
2. Click on WAN and change the WAN Setting to bridge mode.
3. Click on Apply
4. Click on DHCP located at the left hand side page and follow the 3rd option.
5. After having followed the above 3rd and 4th step. Go to Tool tab--> System and click on Save and reboot
After having followed all these above steps. We need to create a new connection which supports Bridge mode.
Here's how you do it
1. Go to Control Panel--> Network Connections---> Create a New connection
2. A New connection Wizard will pop up. You need to configure it so as to get an access to internet.
3. Select the option "Connect to Internet" and click on Next.
4. Choose the option "Setup the Connection Manually" then click on next.
5. Choose the option "Connect using Broadband connection that requires username and password
6. Enter the ISP name
7. Enter your User account Details(In case of MTNL its the Telephone number as your username and password you are using everywhere.)
Thus your bridge mode has setup and ready surf in it. Set up a shortcut connection and desktop and hit connect.
Here's some settings you need to make when you disable the DHCP
1. Go to Control Panel--> Network Settings
2. Click on the Actual MTNL connection(Main connection) Not the newly created one and select Properties
3. Then, on the General Tab select the Internet Protocol( Tcp/Ip) and click on Properties
4. On the Properties page, enter your Ip address and other details. In this case i am using Open dns. You can also Mtnl's Dns server addresses.
2. Click on WAN and change the WAN Setting to bridge mode.
3. Click on Apply
4. Click on DHCP located at the left hand side page and follow the 3rd option.
5. After having followed the above 3rd and 4th step. Go to Tool tab--> System and click on Save and reboot
After having followed all these above steps. We need to create a new connection which supports Bridge mode.
Here's how you do it
1. Go to Control Panel--> Network Connections---> Create a New connection
2. A New connection Wizard will pop up. You need to configure it so as to get an access to internet.
3. Select the option "Connect to Internet" and click on Next.
4. Choose the option "Setup the Connection Manually" then click on next.
5. Choose the option "Connect using Broadband connection that requires username and password
6. Enter the ISP name
7. Enter your User account Details(In case of MTNL its the Telephone number as your username and password you are using everywhere.)
Thus your bridge mode has setup and ready surf in it. Set up a shortcut connection and desktop and hit connect.
Here's some settings you need to make when you disable the DHCP
1. Go to Control Panel--> Network Settings
2. Click on the Actual MTNL connection(Main connection) Not the newly created one and select Properties
3. Then, on the General Tab select the Internet Protocol( Tcp/Ip) and click on Properties
4. On the Properties page, enter your Ip address and other details. In this case i am using Open dns. You can also Mtnl's Dns server addresses.