PC Peripherals Is my new system running hot? plz help

Status
Not open for further replies.

Sandeep_th

Beginner
Guys....
Please take a look at the temp and suggest if this is normal which i doubt, what should i do?

Hardware monitor
-----------------------------------------------------

ACPI hardware monitor

Temperature sensor 0 37°C (98°F) [0xC1E] (THRM)

Dump hardware monitor

Hardware monitor
-----------------------------------------------------

AMD Phenom II Black Edition hardware monitor

Temperature sensor 0 36°C (97°F) [0x123] (Core #0)
Temperature sensor 1 36°C (97°F) [0x123] (Core #1)

Dump hardware monitor

Hardware monitor
-----------------------------------------------------

ATI Radeon HD 4800 Series hardware monitor

Voltage sensor 0 1.12 Volts [0x1] (GPU Core)
Temperature sensor 0 53°C (127°F) [0x35] (GPU Core)

Dump hardware monitor

Hardware monitor
-----------------------------------------------------

WDC WD5000AACS-00G8B1 hardware monitor

Temperature sensor 0 34°C (93°F) [0x22] (HDD)

Dump hardware monitor

please suggest what to do?
 
Guys...

the temps on the GPU are averaging at 80c after playing games for like 30 minutes... should i replace the stock cooler. I would prefer the temps to be well within 60c.

Any recommendations

Thanks again
 
Sandeep_th said:
Guys...
the temps on the GPU are averaging at 80c after playing games for like 30 minutes... should i replace the stock cooler. I would prefer the temps to be well within 60c.

Any recommendations

Thanks again

try increasing the fan speed in catalyst control center...
 
Well this are good temps, however I think this are Idle temps, What are the load temps, try running orthos,e.t.c as well as heavy strategy games with loads of particles and full shraders and possibly a big map with lots of people.

Also if you feel the temps are high than I suggest you use MX-2 or any non-conductive ceramic, I think you can also use OCZ Freeze. Apply on the North Bridge, South Bridge, CPU as well as GPU.

The temps should go down more. I like to see load temps at 40.
 
Status
Not open for further replies.