Lapping a TRUE Black 120 Extreme and a Q6600

Status
Not open for further replies.
T

toolius

Inactive
Galvanizer
hey everyone..
umm ok just got a black 120 extreme and got busy lapping..
The base was pretty concave so didnt even bother installing it .
lapped my q6600 with 600-800-1000-1500.
will post pictures very soon.
currently an busy with lapping the heck out of my true 120.
started lapping my true with 320 and still on the same grit !!! been 2 hours solid.
next will b e 600-800-1000-1500.
Will post pictures of the complete process very soon guys :)
both cpu and TRUE were SHOCKINGLY concave. so yeah thanks INTEL !! lol
pics coming soon along with a proper written walkthrough .
cheers everyone :)
next project lapp a core i7 940 and a 965 for a friend.. will post pics of that too when i get started and have the guts. LOL
cheers guys
 
still lapping the TRUE LOL.. on the 1000 grit.

will post pictures as soon as she is done guys :)

cheers and thanks for the support too :)
 
Me thinks at the rate toolius is going with the lapping his TRUE will end up the size of a Ultima 90 :ohyeah:

I have a TRUE installed and right now the CPU temp of my stock e7200 is 34C, I have not performed any LAP DANCING with my TRUE :P
 
Preliminary Temps :)
so far this what she says.
Tj Max is set to Auto
The Temps are @ idle.
Currently Running the System Stability Test for the last 20 mins and temps are @31 Deg C @ full load. Room temperature is approx 24 Deg C
Many more images coming very soon.
My poor aching arm !!
cheers everyone :)
 

Attachments

  • temps.jpg
    temps.jpg
    169.5 KB · Views: 116
BIKeINSTEIN said:
Someone remembered his SI-128 lapping days. :P
Click to expand...

It is now most likely like a SI-127.5 :ohyeah:

toolius said:
My poor aching arm !!
Click to expand...

EXACTLY !! .... near the end of lapping my SI-128 I was seriously tempted to hurry up the process by using a grinding wheel..... and the reason why good bud Bikey "tee hee'd" is because I had over-lapped this heat sink so much that it used to rotate about a quarter turn when the CPU fan was switched on - I had the only rotating heat sink in the world !! :ohyeah:
 
now my neck hurts too. LOL

damn this took a toll on me . !!

even i felt like i should keep going. only my body told me stop. hehe.

but has turned out pretty well i think..

now to upload some pics as soon as i wake up. after a 30 min stress test i saw 34 deg C @ full load. Ambient room temp was 24 Deg C.

Looks like it worked :). Yippeee...
 
Here are some pics :)

Sorry for not taking as many pics of the processor as i should have . But have tons of the TRUE.:)

This is after 6 Rotations on 600 grit. Notice the IHS still visible on the corners.



This is after 2 rotations on 800 grit.. The Intel IHS coating is getting much smaller :)



this is after the first round of the 1000 grit..



This was after the i finished the 1500 grit and was testing the processor .



And this is after the 2000 Grit .. all done :)





More pics coming soon everyone :)
 
Status
Not open for further replies.
Top Bottom