LBBLE 0519APAW 3200+ Venice...

Status
Not open for further replies.
T

Trevor

Beginner
Haven't started the overclocking quite yet, but building the system tomorrow.
LBBLE 0519 APAW
Grabbed a DFI Ultra-D mobo (going to SLi it :P No use for SLi. But it's cool.)
and some OCZ EL plat. Rev 2.. (Was going to pull the heat spreaders off to check TCCD/TCC5... but I wasn't up to it.
Running a custom watercooling set with a dual 120 Rad, eheim 1250 pump (Meh. I had the room, and reliability was major..) and an MCW6002 (Was going to go with a G4/etc.. but didn't feel like shelling out 80 bucks for a WB.)

I'll let you guys know how it goes, found this forum while scouring for some info on the 0519s... I was going to hook the system up as soon as the Mobo/CPU got here (Had the RAM for a bit), but didn't want to take the current one down until I got my X800XL in-- (Meh. It's decent. Tiding me over 'till the R520s finally ship...)-- So as soon as I get it from my brother (Shipped to his house, no PayPal/eBay here used his.) tomorrow, s'all mine.

I'll keep you guys posted.. should go VERY well.

Any advice/suggestions?

Ack. Didn't see the long 'Post Overclocks here" thread. Mod mind deleting this?
 
Haven't had a chance. Board's been down... so I didn't bother, then, lucky me, I decide to take the stuff apart, to put my new things in.
I'm running my nice custom watercooling, so I was feeling for leaks/etc. As it turns out, the o-ring seal on the top of my res. wasn't up to par. Had to replace that, so I didn't get the watercooling up. In addition, the fittings for the res also had the thread tape put on backwards.... so the seal was faulty. Meaning, leak. Not a great leak, but a drop or two a day... which is enough to cause a problem over time. So, had to take the entire system out. Then had to wait for my Dad to bring me some DI water. Got the DI water yesterday (sunday) but had to do massive amounts of calculus homework.
So, couldn't do it then.
Same thing for now, not enough time to set it up in one go... (You really can't put watercooling together over time.. it's all-or-nothing, as you all know :().
So, waiting for a chance to put it back together before I attempt any 'real' overclocks.

Could be tomorrow, could be friday. Friday at the latest.. tomorrow at the earliest.
Small update. :)
 
Trevor said:
Haven't had a chance. Board's been down... so I didn't bother, then, lucky me, I decide to take the stuff apart, to put my new things in.

I'm running my nice custom watercooling, so I was feeling for leaks/etc. As it turns out, the o-ring seal on the top of my res. wasn't up to par. Had to replace that, so I didn't get the watercooling up. In addition, the fittings for the res also had the thread tape put on backwards.... so the seal was faulty. Meaning, leak. Not a great leak, but a drop or two a day... which is enough to cause a problem over time. So, had to take the entire system out. Then had to wait for my Dad to bring me some DI water. Got the DI water yesterday (sunday) but had to do massive amounts of calculus homework.

So, couldn't do it then.

Same thing for now, not enough time to set it up in one go... (You really can't put watercooling together over time.. it's all-or-nothing, as you all know :().

So, waiting for a chance to put it back together before I attempt any 'real' overclocks.

Could be tomorrow, could be friday. Friday at the latest.. tomorrow at the earliest.

Small update. :)
Click to expand...

ummm...when i had watercooling, i never bothereed to check for leaks (except the first time :P ) i just plugged the pipes n booted :D

sold off the waterblock, getting a new one (DangerDen RBX) shortly :D
 
SunMysore said:
ummm...when i had watercooling, i never bothereed to check for leaks (except the first time :P ) i just plugged the pipes n booted :D

sold off the waterblock, getting a new one (DangerDen RBX) shortly :D
Click to expand...
I did a 45 minute leak test the first time around... but the amount of water coming out of this is so minute, you don't notice until there's a sticky substance on your fittings, and you notice a large air bubble...

Also.. why the RBX? The MC6002 outperforms it, and it's about 45 dollars.
Fourth only when compared to the whitewater/cascade (which is now pointless)/G4... Sad, all of those blocks created by one guy. (Cathar.) I think.
Anyway, price/performance, it's nice.
Certainly not a G4, but then again, I didn't want to throw 80 bucks on a WB

Also--
2.6 Stable.. (Mind you, not prime stable... but I can game/use PS:CS at the same time for 4 hours straight or so. No problems.... that's stable in my book. I'll keep it on 24/7 to see if I get any troubles.)
Again, air.. 2.5-3-3-6... tweaking the timings, watercooling should be up by tomorrow though.
1.482v or so.
With water, and some actual tweakng work.. should be nice.
 
had a TDX...gave it away for an RBX..anyway its bought :D

using a 1200lph submersible....actually the total cost of all componenets is just shy of 120$ :D its a very cheapo setup......

i had a 700lph pump during my previous stint...maybe thats why no leaks....i had done a >2hr leak test the first time :D

EDIT :

I ahd done a 2532MHz suicide on my barton 2500+ on the TDX, VCore 2.0 ....2420MHz VCore 2.05 prime stable for 5 mins, max temp was 50*..D: can run games on it though
 
Final results:
10x280HTT
2.5-3-3-6 timings.
:D
Not too shabby, especially the timings.
Shame though, a girl came into my room and somehow screwed up my HDD. No idea what to do now =/
 
Trevor said:
Final results:

10x280HTT

2.5-3-3-6 timings.

:D

Not too shabby, especially the timings.

Shame though, a girl came into my room and somehow screwed up my HDD. No idea what to do now =/
Click to expand...

Apparently no one read that =P My HDD fried..

However, a week later.. I fixed it =D

Yay!

here they are...

(Mind you, the overclock isn't superb.. the timings are ;))

Didn't get a chance to SuperPI/Prime..

I'll do that right now, now that I finally have it up :D

dbd99f84.jpg


Also lowering volts.. give me a bit to get new screens up.
 
Thanks. I think I'm capped speed-wise, but I'm going to work on getting the memory bandwith ideal.. here's a shot of current stats (the bandwith tests on everest, for whatever reason, SUCK (Especially considering I'm running @ 2.5-3-3-6). I'm going to mess with my timings and try to up my score a bit.

dc46678c.jpg


--Trevor
 
CPU speed is under load, btw... and ignore the time, it's not really 4:47 :P Haven't adjusted it back yet!

Damnit. Did it again <_< I thought I clicked edit, but I clicked quick reply, then typed in the wrong box. Damn damn damn. Oh well :)
 
Status
Not open for further replies.
Top Bottom