Well for a simple window mod.... 2 options
1) KMD will do it for u
2) DIY
hyeah:
for DIY
supplies u need
1)3M tape --- source KMD or h/w stores (difficult to find)
2) Acrylic sheet ---- Acrylic stores
Doing it Options for acrylic---
1)Get the sheet cut by glass cutter
2) DIY
hyeah:
for DIY
use a marker to outline and cut the acrylic.
get a acrylic cutter for 300-400 bucks
Options for cutting a window in side panel
1) Get it done by a metal cutter (advisible)
hyeah:
2)DIY
for DIY u need
Jigsaw, or hole saw with a drill and gradually increase the size and makes lots of holes and make the window....
Entire Process
1) Cut the window
2) Put u channel to avaoid cutting ur fingers
3) Cut the acrylic according to the window size
4) Put 3m tape on the edges
5) Fix the acrylic (hope its a fancy looking sheet)
All done :hap2:
Added bling
1) On the inside fix white Leds not visible outside...(edges of the window)
2) Fix it to the PSU supply with a resistance of 1k ohms in series....
3) fire it up
All done glowing side window.....
geez... i typed this so fast tht it will have lots of typos...take care of it