Quad Master
Guide
For those you dont want the SLi but later think of SLi.
Had orignally posted this in the DFI Discussion thread but i felt that this thing deserves a special place here.
But the problem is from where will we get the Sli Bridge.
DFI Ultra Mobo can be modded to a Full blown DFI LP SLi-DR
Also one important thing to not is that NVida were not at all happy with this
hack and they immediately chnaged this in there new drivers.
So if you are lucky to get your hands on the Nvida Sli Drivers 66.75 Drivers you are lucky and some more luck will be req for getting your hands on the SLi Bridge.
In AnandTech DFI Review
nVidia has acted to prevent, or at least make it more difficult, to mod the Ultra board to SLI. First, DFI has advised us, and posted on their website, that they will NOT sell the SLI bridge to buyers of the Ultra board. Second, nVidia has advised us that future shipments of the Ultra chipset have been modified so that the mod to SLI will no longer be possible. An additional side effect of this second action is that the "Dual Video" mode, which performs at about 90% of SLI performance levels, will only work with nVidia SLI drivers 66.75 or earlier. If you do a quick check of web driver postings you will see it is now very difficult to find 66.75 drivers. With a chipset modded to SLI the "Dual Video" mode worked through 70.xx versions of the nVidia driver. nVidia also made it clear they will continue to make driver changes to prevent functioning of any "non-standard" (8X/8X) operation of their SLI driver. This also throws into question whether the VIA "dual graphics" mode on the 894 Pro chipset will ever work with nVidia graphics cards. If you are interested in the current UT Ultra-D we suggest you buy one now if you can find it. Future versions of the UT Ultra-D will not have the same capabilities as a result of these actions.
Morphing AnandTech Article
If you have been following the news, some very strange things are going on with the nVidia nForce4 chipsets. About six weeks ago, MSI showed an nForce4 ULTRA motherboard with a regular x16 PCIe slot, plus an open-ended x4 PCIe slot. Those who saw the demos said that MSI was running two matched video cards in what they called a "semi-SLI mode", which ran at about 90% of the performance of normal nVidia SLI. This was an interesting development because nF4 Ultra chipsets are cheaper than nF4 SLI chipsets. The boards based on the Ultra chipset are, therefore, much cheaper than the high-end SLI parts that we are seeing in the market. An arrangement like this would be a god-send for computer enthusiasts who watch their budget, yet still like to enjoy most of the benefits of SLI dual video-card performance.
Just as quickly, we learned that nVidia was not happy with this "SLI hack" and they changed their drivers quickly so that "semi-SLI would not work with current and later Forceware drivers." It appears that the later Forceware drivers check the chipset ID and if the driver sees "Ultra", then SLI is not enabled. MSI decided to kill the "semi-SLI" board because it would be a nightmare supporting a board that would only run with older nVidia SLI drivers.
Then, at CES, DFI was displaying both nForce4 SLI and nForce4 Ultra motherboards with two x16 PCIe slots. We were told that Epox also had an nForce4 Ultra motherboard with another semi-SLI solution based on the cheaper Ultra chipset. DFI told us that they used the same PCB for both versions of the nForce4 boards for economy, and that in fact, the nForce4 Ultra board could run a dual x2 video mode with earlier nVidia Forceware drivers in addition to standard single x16 video mode. Given AnandTech's close working relationship with DFI, we had arranged an exclusive look at both DFI boards. When the boards arrived, we were indeed able to run an x16/x2 dual video mode on the nForce4 Ultra with driver version 66.75 - a very early nVidia SLI driver. We tried many, many Forceware versions and also found that 70.41 also worked by adding one line to the registry. However, like MSI, the Ultra dual-video only worked on very old SLI drivers or on drivers with a Registry mod.
It was clear at this point that this Ultra dual-video solution did work, but that nVidia had turned it off in recent drivers. This caused us to wonder what was really going on with nForce4 chipsets. If nVidia could enable/disable this Ultra SLI in drivers, then the base chips must be very, very similar. In fact, it would be logical if the nF4 Ultra and nF4 SLI were exactly the same chip with some modification, making the chip an Ultra in one case and an SLI in another. The pin-out configurations are, after all, exactly the same with both chipsets.
It was with this idea that we took a closer look into the possibilities, and what we found will surprise you! It turns out that the nForce4 Ultra is apparently just an nForce4 SLI with SLI turned off. What is even more important is that we also found a way to turn on the disabled SLI!
Full Article Read Here:- http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2322
Had orignally posted this in the DFI Discussion thread but i felt that this thing deserves a special place here.
But the problem is from where will we get the Sli Bridge.
DFI Ultra Mobo can be modded to a Full blown DFI LP SLi-DR
Also one important thing to not is that NVida were not at all happy with this
hack and they immediately chnaged this in there new drivers.
So if you are lucky to get your hands on the Nvida Sli Drivers 66.75 Drivers you are lucky and some more luck will be req for getting your hands on the SLi Bridge.
In AnandTech DFI Review
nVidia has acted to prevent, or at least make it more difficult, to mod the Ultra board to SLI. First, DFI has advised us, and posted on their website, that they will NOT sell the SLI bridge to buyers of the Ultra board. Second, nVidia has advised us that future shipments of the Ultra chipset have been modified so that the mod to SLI will no longer be possible. An additional side effect of this second action is that the "Dual Video" mode, which performs at about 90% of SLI performance levels, will only work with nVidia SLI drivers 66.75 or earlier. If you do a quick check of web driver postings you will see it is now very difficult to find 66.75 drivers. With a chipset modded to SLI the "Dual Video" mode worked through 70.xx versions of the nVidia driver. nVidia also made it clear they will continue to make driver changes to prevent functioning of any "non-standard" (8X/8X) operation of their SLI driver. This also throws into question whether the VIA "dual graphics" mode on the 894 Pro chipset will ever work with nVidia graphics cards. If you are interested in the current UT Ultra-D we suggest you buy one now if you can find it. Future versions of the UT Ultra-D will not have the same capabilities as a result of these actions.
Morphing AnandTech Article
If you have been following the news, some very strange things are going on with the nVidia nForce4 chipsets. About six weeks ago, MSI showed an nForce4 ULTRA motherboard with a regular x16 PCIe slot, plus an open-ended x4 PCIe slot. Those who saw the demos said that MSI was running two matched video cards in what they called a "semi-SLI mode", which ran at about 90% of the performance of normal nVidia SLI. This was an interesting development because nF4 Ultra chipsets are cheaper than nF4 SLI chipsets. The boards based on the Ultra chipset are, therefore, much cheaper than the high-end SLI parts that we are seeing in the market. An arrangement like this would be a god-send for computer enthusiasts who watch their budget, yet still like to enjoy most of the benefits of SLI dual video-card performance.
Just as quickly, we learned that nVidia was not happy with this "SLI hack" and they changed their drivers quickly so that "semi-SLI would not work with current and later Forceware drivers." It appears that the later Forceware drivers check the chipset ID and if the driver sees "Ultra", then SLI is not enabled. MSI decided to kill the "semi-SLI" board because it would be a nightmare supporting a board that would only run with older nVidia SLI drivers.
Then, at CES, DFI was displaying both nForce4 SLI and nForce4 Ultra motherboards with two x16 PCIe slots. We were told that Epox also had an nForce4 Ultra motherboard with another semi-SLI solution based on the cheaper Ultra chipset. DFI told us that they used the same PCB for both versions of the nForce4 boards for economy, and that in fact, the nForce4 Ultra board could run a dual x2 video mode with earlier nVidia Forceware drivers in addition to standard single x16 video mode. Given AnandTech's close working relationship with DFI, we had arranged an exclusive look at both DFI boards. When the boards arrived, we were indeed able to run an x16/x2 dual video mode on the nForce4 Ultra with driver version 66.75 - a very early nVidia SLI driver. We tried many, many Forceware versions and also found that 70.41 also worked by adding one line to the registry. However, like MSI, the Ultra dual-video only worked on very old SLI drivers or on drivers with a Registry mod.
It was clear at this point that this Ultra dual-video solution did work, but that nVidia had turned it off in recent drivers. This caused us to wonder what was really going on with nForce4 chipsets. If nVidia could enable/disable this Ultra SLI in drivers, then the base chips must be very, very similar. In fact, it would be logical if the nF4 Ultra and nF4 SLI were exactly the same chip with some modification, making the chip an Ultra in one case and an SLI in another. The pin-out configurations are, after all, exactly the same with both chipsets.
It was with this idea that we took a closer look into the possibilities, and what we found will surprise you! It turns out that the nForce4 Ultra is apparently just an nForce4 SLI with SLI turned off. What is even more important is that we also found a way to turn on the disabled SLI!
Full Article Read Here:- http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2322
