CPU/Mobo New PC onboard graphic problem

Status
Not open for further replies.
rohitshakti2

rohitshakti2

Contributor
I hv bought a new PC with the following configurations:

AMD X4 635

Gigabyte 785 GMT-US2H

4 GB Corsair XMS3 (1600 mhz) ram

1 TB Seagate 7200 rpm

Corsair CX400

Bijli cabinet

Yesterday I installed Win7 Ultimate on it. When I checked the system performance, it was showing Score -1. Which is the lowest.

1. Pls tell why is it so when the mobo has onboard 4200 graphics and I am using 4 GB Ram?

2. When my system boots, it tells that DDR3 is running in UNGAGED mode 1066.

I am also attaching the system file showing all the hardware details for help.

system info.nfo

3. My mobo has only one port for Keyboard and mouse. Is there any cable to make it two?

4. Whenever the system boots, it asks Sata is found running in IDE mode and asks if you want to change it to AHCI mode. Press Y or N. Pls tell what to do?



Basic information

OS Name Microsoft Windows 7 Ultimate

Version 6.1.7600 Build 7600

Other OS Description Not Available

OS Manufacturer Microsoft Corporation

System Name SEHGAL-PC

System Manufacturer Gigabyte Technology Co., Ltd.

System Model GA-MA785GMT-US2H

System Type x64-based PC

Processor AMD Athlon(tm) II X4 635 Processor, 2900 Mhz, 4 Core(s), 4 Logical Processor(s)

BIOS Version/Date Award Software International, Inc. F3, 11/30/2009

SMBIOS Version 2.4

Windows Directory C:\Windows

System Directory C:\Windows\system32

Boot Device \Device\HarddiskVolume1

Locale United States

Hardware Abstraction Layer Version = "6.1.7600.16385"

User Name Sehgal-PC\Sehgal

Time Zone India Standard Time

Installed Physical Memory (RAM) 4.00 GB

Total Physical Memory 3.50 GB

Available Physical Memory 2.90 GB

Total Virtual Memory 7.00 GB

Available Virtual Memory 6.35 GB

Page File Space 3.50 GB

Page File C:\pagefile.sys



Uploaded with ImageShack.us

18312300.png


pc1md.jpg


http://img683.imageshack.us/img683/1571/18312300.png

http://img42.imageshack.us/img42/6792/pc1md.jpg
 
Update your ATI drivers.

Go to the bios and set the timings for your RAM manually. Set the voltage that the memory module is rated to work in. Set the timings after that. And finally set the speed. OR let it detect from the memory's ePP profile(Enhanced Performance Profile).
Disable FDC controller if it's there in your BIOS.

Enable all the IDE features, consulting the manual of course.

Disable SATA RAID if it's ON(I think it's not supported in ur mobo).

AHCI mode - it depends on which mode did you install your OS in, if you installed it in IDE mode then press N else press Y.

AHCI mode is recommended for SATA drives. For Win7 visit this link.
 
Go to the bios and set the timings for your RAM manually. Set the voltage that the memory module is rated to work in. Set the timings after that. And finally set the speed. OR let it detect from the memory's ePP profile(Enhanced Performance Profile).

Disable FDC controller if it's there in your BIOS.

Enable all the IDE features, consulting the manual of course.

Disable SATA RAID if it's ON(I think it's not supported in ur mobo).

AHCI mode - it depends on which mode did you install your OS in, if you installed it in IDE mode then press N else press Y.

AHCI mode is recommended for SATA drives.
Click to expand...

What manual settings should i use in voltage and ram timings?

What is IDE?
 
1. Pls tell why is it so when the mobo has onboard 4200 graphics and I am using 4 GB Ram?

check ur display drivers.....

2. When my system boots, it tells that DDR3 is running in UNGAGED mode 1066.

u have to manually adjust the timings first try this at 1.5v:

CAS#(CL)-9

RAS#(tRCD)-9

tRP-9

tRAS-24

frequency should be at least 1333Mhz

3. My mobo has only one port for Keyboard and mouse. Is there any cable to make it two?

buy a usb mouse

4. Whenever the system boots, it asks Sata is found running in IDE mode and asks if you want to change it to AHCI mode. Press Y or N. Pls tell what to do?

N as there is no performace difference between ahci and ide.
 
Thanks to all the members for their help. Yesterday, I formatted my full system and reinstated the XP and Win7 in dual boot.

Then I updated the drivers (ATI) from the CD and then from the links above.

Then again I checked the PC rating and now it is showing 4.1 instead of earlier 1. Is this 4.1 rating OK with only the onboard graphics as I donot have any graphic card.

I have made the following changes in the bios and the PC is running at 3.1 ghz. But did'nt had time to check its stability. But it is working OK for the last 4 hrs. Pls tell me some latest softwares to check the stability of my PC.

CPU Clock Ratio - Auto

CPU North Bridge Frequency - Auto

CPU Frequency - 215 (changed from 200 to 215)

PCIE CLock - Auto

HT Link - Auto

HT Frequency - Auto

Mem clock 6.66 (when I increase it to 8.0 X, the PC tells that it cannot boot due to incorrect overclocking). - But not able to understand it as my ram is 1600 mhz.

DRam Mode - Unganged

D Ram Timing - Auto

Voltage Normal

DDR3 Volt Control - 0.050V - 1.650V (as per the module the default voltage is 1.650 v)

Current Temp - 35

CPU Temp - 39

Fan speed - 2300

Current System Fan speed - 0

Current NB Fan Speed - 0

PC Health report in BIOS shows the following:

V.Core - 1.360v

DDR3 - 1.5v 1.600v

3.3v - 3.376v

12v - 12.365 v

Pls tell if the above is OK
 
I am stuck. When I put the ram to 8.0X it is running at 1600 mhz with 2.9 ghz processor which is its default settings.

But when i OC the FSB to 216 etc, the PC does'nt boot and save you have OC it very high. As per the mobo, it supports upto 1800 mhz for ram.:x

Pls tell what to do.

SOme pictures taken at everything default are given below:















https://picasaweb.google.com/100402065614981467658/Apr12011?feat=directlink

If I do 225 FSB and change the ram to 6.6X, then the PC will be running for 3.3 ghz and ram at 1445 mhz (aprox.).

Will that be more speed than the default settings or ........?
 
Status
Not open for further replies.
Top Bottom