CPU/Mobo No beep

domnic · Nov 9, 2008

hi guys yesterday my pc went off due power failure and for some reson it wont boot now, it doesnt give a beep sound the the proccy fan works, the dvd writer opens up, the led on the board is on but for some reson it wont give a beep....i just assembled it last week...can sum1 plz help me....

This is my config
Motherboard - Asus P5N-MX
Proccy - C2D E7200
2 gb ram

H2O · Nov 9, 2008

Check RAM open teh ram try different slots or try booting with only 1 stick if you have 2

whacky_rohan · Nov 9, 2008

check if all the devices are properly connected... try tightening all the components again... n remove and re-insert the ram...

domnic · Nov 9, 2008

I removed everything and reinstalled everything again but still it doesnt give a beep.....

The Sauron · Nov 9, 2008

Clear CMOS by moving jumper from motherboard.

clown_abhi · Nov 9, 2008

No beep usually means the RAM is not working or there is a problem with overclocking or stuff.
So, try resetting the CMOS coz dat is going to remove overclocking woes and then try changing with a friend's RAM. The RAM might have gone kaput.

Kneo · Nov 10, 2008

I've had the same problem but mine was a 2 yr old mobo so sent it for repairs. You can try this Computer problems

domnic · Nov 10, 2008

Thanks guys for all ur replys i gave the board 2 the service centre i think something is wrong with the board.... coz i tried everything but nothing happened so i took the board along with the cpu and ram 2 the dealer i got it from he checked it and said somthing is wrong with the board so i had 2 give it 2 the service centre... and 1 more question where will i get thermal paste from coz i wiped it of the cpu...

The Sauron · Nov 10, 2008

Thermal paste available in every computer shop at 20-50 Rs only.