CPU/Mobo No display on new build

Status
Not open for further replies.
babloos

babloos

Contributor
guys there is no display with my new rig.

2500k

asus p8p67 pro

gskill 2#2 4gb 1600mhz cld9{9_9_9_24}

corsair tx650w

this is my config, when I power on,cpu runs for few seconds

shutdowns and restarts during all this process monitor is in

power saving mode no display, tried ram with defferent slots

as well as using single stick,still same problem, this rams worked

without any problems with my previous core i5 rig,graphics card and

and psu works with another rig without any problem,also removed

cmos battery and reinserted still same problem, someone help me :/
 
Re: need help urgent

- What GPU have you plugged into the board?

- Did you connect/insert all the required power cables into their respective slots properly? This includes the board's 24pin & 8pin connector and your GPU's power connectors (if it has any).

- Is the DVI/HDMI cable connected to the display from the GPU properly?
 
Re: need help urgent

Gannu said:
- What GPU have you plugged into the board?

- Did you connect/insert all the required power cables into their respective slots properly? This includes the board's 24pin & 8pin connector and your GPU's power connectors (if it has any).

- Is the DVI/HDMI cable connected to the display from the GPU properly?
Click to expand...
bro checked everything,gpu is working another rig
 
vpraveenis said:
i5 2500k.....

Edit: OP is your mobo a good new one? I remember your other thread where you mentioned you got it from some special channel......
Click to expand...
yup new one using for first time

--- Updated Post - Automerged ---

thanks everyone, problem sorted out its rams, went to local shop

tried with some dynet rams it's worKing
 
Status
Not open for further replies.
Top Bottom