Monitors No display on the monitor?

Status
Not open for further replies.

nanda

Inactive
Contributor
My friend's system config:

Q6600
Biostar 35 M/B
CM 500
Trans 2x1 gb
WD 320 gb
Viewsonic VX2255wmh
Xfx 8600GT
After Switch on the system, the CPU fan and Harddisk are start to work but we wouldn't get the display on the monitor and as well as the LED's in the motherboard are not lighting?

What's the problem please help!!!!!!!!!!!
 
how come the fans work but the LED's dont? that cant happen. check if the ram and the gfx card are connected properly
 
I am ensure and reconnect all the wires again but the display says "no".

My firiend says if we clear the CMOS if anything goo happens" so we clear the CMOS using the jumpers and by removing the battery but no gain.

Please help because we got continuous problems like this and we are in the heavy frustation about the system

:@
 
Are you assembling a new system or was it working properly before....

If its a Monitor problem,try pressing 2 button on the LCD,it will switch between DVI and VGA ports.
 
After reconnecting the 4 pin powerconnector the system display is OK

But when the system is switch on, it automatically restarts after 10 seconds and then system display was came.

IS THIS THE PROBLEM OF SMPS OR SOMETHING PLEASE HELP!!!!!!!!!!!!!!!!!!!!!:S
 
Status
Not open for further replies.