Not able to find NETWORK settings in XFX 650i Ultra MOBO

bodmas

Adept
Hello Techi Frenz,
I am using XFX 650i ultra mobo nd want to connect with it my YOUNGER low config PC;) . I am not able to find NETWROK settings for MOBO. Shud i have to buy an external network card to bridge netwrok with other PC. Any1 facing same problem, please share SOLUTION:eek:hyeah: .
Hoping helpful advices and solution from my TECHI frenz....
Thanks
 
check the driver setting if install /uninstall proper download lastest version

or check for xfx driver cd ;)

u can download latest driver guru 3d from website find nfore 18.xx
 
1. Install network driver.

2. If you are directly connecting the two PCs, get a crossover cable. Otherwise, if you are connecting through a switch, get regular straight through cable.

3. Use either the manual configuration, or windows network config wizard to get you started
 
Thx Ajayarun and checksum for participating..... Fortunatly i got the exact solution from my other techie fren like you... Here is the solution....

Run Regedit to edit your registry
Go To : HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lNetwork{4D36E972-E325-11CE-BFC1-08002BE10318}
Notice that I have sent you to 4D36E972
You should see that you have others, very similarly named, but open the 72 entry
You will see a number of directories surrounded by squiggly brackets {xxx}. Under each one, you will find a folder called Connection. Open each Connection folder in turn, and look for a registry key called Name (see my screen shot called regkeys.jpg, which is showing a good entry).

The Name key MUST be type REG_SZ

If it is anything else, it is incorrect. In my registry, I had 5 other entries, all with connection folders, all with hex values listed as the type for the Name Key. At this point, if you are feeling nervous, right click on Network, and choose Export. Save yourself a .reg file named anything you like so that all you have to do is double-click on it to restore what you had before.

If you are feeling brave, delete all entries which don't have a correct Name value. What I mean here is to delete the complete folder and any subfolders underneath the 72 directory which have bad name keys. That should leave you with only a few good ones, one of which will be called "Local Area Connection". You will also likely have another called "1394 Connection.

Just leave any entry alone if the name type is REG_SZ.

Now reboot. Ta-dah! You now have correct icons in your Network Connections folder.

This solution was take from Nvidia forum...
NVIDIA Forums -> Onboard NIC missing from Network Connections

Guyz, I am also facing one more problem..
I am also not able to use the front I/O audio ports of my cabinet. The local dealer says, XFX 650i mobo is 6 channel audio.. Is this the reason i m nt able to use front I/O audio ports of cabinet.....:O
 
Back
Top