PC Peripherals One Raptor is faster than a RAID-0 array

Status
Not open for further replies.

dipdude

Forerunner
WD1500AD Raptor X-Tends Performance Lead

The new top model offers 150 GB, a good amount of extra performance and officially targets high-end enthusiasts. It is pretty obvious that the Raptor-X is a great drive, but is it great enough to become a "must-have"?

Now that Western Digital finally caters to the enthusiast crowd, it had to create a very special product. Thus the firm decided to offer its end user Raptor-X with a clear cover, which is quite a respectable move given the rather conservative pace that used to dominate product policy. The center top part of the Raptor-X is equipped with a coated transparent polycarbonate, which allows for an insight into the mechanical heart of the drive, particularly fascinating while the drive is busy. The website www.wdraptorx.com explains how this was realized, since the clear cover material has to be able to cope with changing inside pressure levels, temperature fluctuations and electrostatic discharge. You may have seen clear cover drives at exhibitions or shows, but the Raptor X is the first production drive that offers this feature to the masses.

wd1500both0st.jpg


Conclusion: The Raptor-X Is Unrivaled

Finally, we have a new high-performance enthusiast hard drive that is capable of beating its competition in the blink of an eye. Of course it's the high rotation speed of 10,000 RPM that lets the Raptor perform noticeably better than any 7,200 RPM drive in everyday uses. This applies to both access time and data transfer performance, and it helps to further reduce the annoying little delays inherent in everyday PC operation.

The Raptor-X's performance is even good enough to beat a RAID 0 array consisting of two modern 7,200 RPM drives, except in terms of pure throughput, of course. In addition, it is nicer having only one drive to install, and the data safety of a single drive is better anyway. Speaking of safety, we should refer to the five year warranty, which should give you a good feeling.

So is the Raptor-X the perfect show stopper for the competition? Yes, it is, but not only because it's better than its rivals in the enthusiast market space. Generally we would always recommend the fastest drive available as a system drive, although we believe that $350 is a bit over the top. (The fact that you will save $50 by simply doing without the clear cover should be also taken into account.)

The reason why the Raptor-X actually is unrivaled is the total lack of competition in this high performance desktop space. Seagate may have some potential due to the recent acquisition of Maxtor, but the current Barracuda 7200.8 and 7200.9, as well as the Maxtor portfolio, simply aren't good enough for users with the highest performance ambitions. That's especially the case since the new Raptor is considerably faster than its predecessors. It's time for Hitachi, Maxtor/Seagate and Samsung to get moving.

For the complete review with benchies go to : Toms
 
goldenfrag said:
Checking it now.
OMFG! Its 350 Dollars! To Pre-Order one.. OMGH :O..!

Yeah, very expensive!!

But then, with that kinda performance you got to pay the dough, i suppose..;)
 
I dont really see why they charge like 70+ dollars more for just that stupid window. I mean, how is it done? That top cover is removed and a hole is cut in them?
 
TheMask said:
the material used for the trasparency must be l33t.. atleast they wanna us believe so :P
i have seen cheap harddisk mod on bit tech altho its very risky :)
 
I really dont know whats risky.. Is it Risky to remove the Metal Cover from your hard disk? :)... No :p...
 
^^ Its only risky if u plan to use the drive after u have opened the cover :P.. dust is a major concern and if any of it gets into the drive, even a tiny bit, the disc cud be physically damaged rendering it useless. Ofcourse if u open the drive in a sterile environment, u reduce the chances of damaging but a huge extent.

And what Rahul meant by 'risky' is most probably the fact that finding a tranparent material that is "able to cope with changing inside pressure levels, temperature fluctuations and electrostatic discharge," might not be easy. And even if u did get that material, u've got to get it moulded to perfectly fit the drive :P
 
Rahul said:
its the price of the window .... without the window its much cheaper ....
yeah its like 50~70 US less without it....who the f*** will want to pay that much more.....I won't :ohyeah:
Now imagine 2 'o these in a RAID 0.....:ohyeah:

I prefer using 1 raid array and 1 seperate HDD...Price is the only setback....:@ no money...
 
Status
Not open for further replies.