Overclocking AMD X4 635

[rohitshakti2]

I am using AMD X4 635 with Gigabyte 785G mobo along with Corsair 4GB 1600 mhz ram with Bijli cabinet and Corsair CX400 psu.

I have OCed my processor to 3.3 ghz and have underclocked my ram as my mobo can't handle more than 1650 mhz of ram.

The temperatures are shown below. Pls tell if they are correct & within limits.







[img=http://img23.imageshack.us/img23/820/63degree.th.jpg]

[img=http://img856.imageshack.us/img856/448/91928096.th.jpg]

[img=http://img19.imageshack.us/img19/47/1stdu.th.jpg]

 

[dovakhiin]

Can you post a screen which shows the core temp for all cores,IINM this screen only shows the motherboard sensor readings.You could try using CPU HWMonitor.Anyway the recommended load temperature for everyday use is < 55C.So try to keep it that region.60-70C is the danger zone.

 

[rohitshakti2]

Pls see the screen shots through HW monitor here:

 

[ras]

Pls see the screen shots through HW monitor here:

temp looks o.k

you should go max 3.5Ghz with underclocking the ram it works fine

 

[rohitshakti2]

THanks for the info.

Pls also tell me which are the temp. I should keep my eyes on of the above snap and how much underclocking the ram would be fine.

 

[rohitshakti2]

[font=arial, sans-serif]Pls also tell me which are the temp. I should keep my eyes on of the above snap and how much underclocking the ram would be fine. [/font]

 

[dovakhiin]

No one can tell you how exactly much overclocking will be ok.You have to overclock for yourself to find out

Start by simply increasing reference clock in small increments.When you encounter a problem it can be due to failure of your RAM,NB or CPU,at this point you will either have to increase the voltage or reduce the clock speed of the failing component...that's the gist of how to overclock.Just read up and start overclocking,pay attention to temperatures and voltages.

Happy OCing!