CPU/Mobo Pc won't post with 2 rams

Status
Not open for further replies.
A

Abhi_Mahant

Contributor
New PC won't post with 2 rams
VGA debug led got half lit
Cpu and ram full lit

Tested both one at a time.

I waited more than 10 minutes to post with 2 rams.

Specs:
Asrock B650 PG Lightning non-updated bios
Ryzen 7600x
Rtx 4070
500gb sata pcie ssd
Msi mpga750gf psu
Lian Li lancool ii mesh
32gbx2 g.skill trident z5 neo 6000 mhz cl30
www.gskill.com

F5-6000J3040G32GX2-TZ5NR - Overview - G.SKILL International Enterprise Co., Ltd.

Trident Z5 Neo RGB DDR5 memory is designed for ultra-high overclocked performance on DDR5-enabled AMD platforms. Featuring AMD EXPO overclocking technology for easy memory overclocking on supported AMD platforms, the Trident Z5 Neo RGB series is the ideal choice for building high-performance...
www.gskill.com www.gskill.com
 
Last edited:
Check your XMP/EXPO settings in the BIOS. Disable it and check again. Also update to the latest non-beta BIOS with one stick and see if that resolves the issue.
 
  • Like
Reactions: h3ct0r
I recall some online articles and YouTube videos mention that DDR5 platform being new with Zen4 you should be patient when you first boot because BIOS takes very long time to "train" itself to detect the correct RAM settings?

If both sticks are working properly individually then just make sure you are seating both of them in the correct alternate slots and then wait patiently during first boot after making your BIOS settings changes.
 
If both RAM works individually on all the slots then just boot with a single stick and update to latest BIOS and try again.
BIOS update is highly recommended on new platforms regardless.
 
  • Like
Reactions: vishalrao
this happens with my rams too.
the only solution for me is to reseat them repeatedly until it works.
also, they only work together in specific slots, have marked the one close to cpu with a marker.
have been thru 2 kits of ram, still the same issue.
i suspect my gigabyte mobo is the reason.
 
awestorr said:
this happens with my rams too.
the only solution for me is to reseat them repeatedly until it works.
also, they only work together in specific slots, have marked the one close to cpu with a marker.
have been thru 2 kits of ram, still the same issue.
i suspect my gigabyte mobo is the reason.
Click to expand...
What CPU do you have? Maybe it's an issue with the CPU's memory controller?
 
Abhi_Mahant said:
so it works after updating the bios and changing preset from auto to non-expo.
but now I found my crucial mx500 ssd is not working.
Click to expand...
Check your AHCI settings, and ensure that it's enabled.

Disable legacy boot and set it to UEFI only.

Does the drive not show up in the BIOS or is it not booting?
 
  • Like
Reactions: vishalrao
PunkX 75 said:
Check your AHCI settings, and ensure that it's enabled.

Disable legacy boot and set it to UEFI only.

Does the drive not show up in the BIOS or is it not booting?
Click to expand...

Changed ahci settings, I don't find legacy boot
Drive is not showing in bios menu
It's m.2 sata ssd, tried 3rd slot also
 
Status
Not open for further replies.
Top Bottom