PC Peripherals Please Help!!!!System won't boot & start's automatically!!!!

N

nanda

Disciple
My system have a peculiar problem from last week:

Please help!!!!!!!!!!!!!!!
When i start the system by switched on the UPS, the system starts by power is switched "on" and procy fans starts running.

But no display????? And i switch off by using the cabinet switch, it automatically switches "on".

What happens to my system. pLease help!!!!!!!!!!!!!!
 
@nanda
Do You mean to say that the processor fan is running when you press the power button on your cabinet and you are not getting a display on your monitor?
If this is the case then check your RAMS, remove it and reinsert it, this should usually solve the problem.
If this does not cure the problem, try changing the CMOS battery on your motherboard.

Also post your system Specs.
 
I think, there is some short circuiting happening in your cabinet. I had a similar problem, where there was some problem with the front panel switches. So try turning on the computer by manually shorting the power switch (Do it carefully and at your own risk). If that doesn't work, then there could be some shorting elsewhere.

Or, it could even be a PSU problem. Posting your specs wil make it easier for others to provide solutions.

Cheers!

~M
 
I could be POST issues if the system and proc fans are running and there is no display in ur monitor. Its a case in which ur BIOS chip is baked :D

Otherwise try reconnecting ur components esp RAMs as suggested above and check.
 
Back
Top