Android Problem in Reverse tethering in pantech burst

Status
Not open for further replies.
rohitshakti2

rohitshakti2

Contributor
I had downloaded the reverse tethering for pantech burst from here:

http://forum.xda-developers.com/showthread.php?t=1371345

It started in the first attempt but is too slow. Then I discontinued it and when again I am trying to use it, it is showing the following error. Pls help

06-03 06:46:11:303 W/I Tool version : 3.19
06-03 06:46:11:303 W/I adb.exe
06-03 06:46:11:303 W/I aapt.exe
06-03 06:46:11:429 W/I Android Debug Bridge version 1.0.31

06-03 06:46:31:654 W/E RunProcessCommand Timeout for : adb.exe -s 0123456789ABCDEF shell pm list packages -f
06-03 06:46:32:154 W/E Unable to get package
06-03 06:46:32:154 W/E Unplug and replug USB cable and try again.
06-03 06:46:32:154 W/I Installing new package (this can take up to 10s)
06-03 06:46:23.82 A/W process (538) : Attempt to re-install service.tracetool without first uninstalling.
06-03 06:46:33:287 W/I Ok
06-03 06:46:33:969 W/I package : /data/app/service.tracetool-1.apk
06-03 06:46:33:974 W/I adb.exe -s 0123456789ABCDEF shell am start -a android.intent.action.MAIN -n service.tracetool/service.tracetool.MainServiceActivityTab
06-03 06:46:25.34 A/I process (538) : START {act=android.intent.action.MAIN flg=0x10000000 cmp=service.tracetool/.MainServiceActivityTab u=0} from pid 24296
06-03 06:46:25.52 A/I process (538) : Displayed service.tracetool/.MainServiceActivityTab: +169ms
06-03 06:46:34:645 W/I Starting: Intent { act=android.intent.action.MAIN cmp=service.tracetool/.MainServiceActivityTab }
06-03 06:46:26.39 A/I UsbThread6 : usbServerSocket : Waiting for the host to connect
06-03 06:46:35:596 W/I Wait java service
06-03 06:46:35:702 W/I waiting android server connection ... 1
06-03 06:46:35:965 W/I Waiting for connection
06-03 06:46:28.05 A/W getExtractedText on inactive InputConnection
06-03 06:46:28.07 A/W getTextBeforeCursor on inactive InputConnection
06-03 06:46:28.07 A/W getExtractedText on inactive InputConnection
06-03 06:46:28.07 A/W getTextBeforeCursor on inactive InputConnection
06-03 06:46:28.07 A/W getSelectedText on inactive InputConnection
06-03 06:46:28.07 A/W getTextAfterCursor on inactive InputConnection
06-03 06:46:28.10 A/W getExtractedText on inactive InputConnection
06-03 06:46:28.11 A/W getTextBeforeCursor on inactive InputConnection
06-03 06:46:28.11 A/W getSelectedText on inactive InputConnection
06-03 06:46:28.11 A/W getTextAfterCursor on inactive InputConnection
06-03 06:46:28.11 A/W beginBatchEdit on inactive InputConnection
06-03 06:46:28.11 A/W endBatchEdit on inactive InputConnection
06-03 06:46:28.11 A/W getExtractedText on inactive InputConnection
06-03 06:46:28.11 A/W getTextBeforeCursor on inactive InputConnection
06-03 06:46:28.11 A/W getSelectedText on inactive InputConnection
06-03 06:46:37:248 L/D HOST : jied83-Rev-1-0
06-03 06:46:37:249 L/D RELEASE : 4.1.2
06-03 06:46:37:249 L/D SDK : 16
06-03 06:46:37:250 L/D FINGERPRINT : ATT/PantechP9070/presto:4.0.4/IMM76I/presto_0903:user/release-keys
06-03 06:46:37:251 L/D VM name : Dalvik
06-03 06:46:37:251 L/D OS Arch : armv7l
06-03 06:46:37:253 L/D Reverse tethering package version : 3.19
06-03 06:46:37:257 L/D Xposed installer : not installed, app_process : not found, XposedBridge.jar : not found
06-03 06:46:37:260 L/E Hack Connectivity Service not installed, mode : -1, trace : -1
06-03 06:46:28.12 A/W getTextAfterCursor on inactive InputConnection
06-03 06:46:28.12 A/W beginBatchEdit on inactive InputConnection
06-03 06:46:28.12 A/W endBatchEdit on inactive InputConnection
06-03 06:46:37:967 W/I interfaces before script startlo(UP) 127.0.0.1/8, dummy0(DOWN), rmnet0(DOWN), rmnet1(DOWN), rmnet2(DOWN), rmnet3(DOWN), rmnet4(DOWN), rmnet5(DOWN), rmnet6(DOWN), rmnet7(DOWN), rmnet_sdio0(DOWN), rmnet_sdio1(DOWN), rmnet_sdio2(DOWN), rmnet_sdio3(DOWN), rmnet_sdio4(DOWN), rmnet_sdio5(DOWN), rmnet_sdio6(DOWN), rmnet_sdio7(DOWN), sit0(DOWN) 192.168.1.2/24, ip6tnl0(DOWN)
06-03 06:46:38:201 W/I no route
06-03 06:46:38:248 L/D OnStart script 3.19
06-03 06:46:38:250 L/D Interface to use : "sit0"
06-03 06:46:38:396 L/D ifconfig sit0 192.168.1.2 netmask 255.255.255.0
06-03 06:46:38:420 L/D route add default gateway 192.168.1.2 sit0
06-03 06:46:38:512 L/D redirect all communications to TETHER chain
06-03 06:46:38:540 L/D forward tcp to native handler
06-03 06:46:29.63 A/V Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
06-03 06:46:38:688 L/D OnStart script done
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.63 A/V Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.63 A/V Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.63 A/V 0 0 TETHER all -- any any anywhere anywhere
06-03 06:46:29.63 A/V Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.63 A/V Chain TETHER (1 references)
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.63 A/V 0 0 REDIRECT tcp -- any sit0 anywhere anywhere tcp dpts:tcpmux:41999 redir ports 42200
06-03 06:46:29.63 A/V 0 0 REDIRECT tcp -- any sit0 anywhere anywhere tcp dpts:42500:65535 redir ports 42200
06-03 06:46:29.63 A/V 0 0 REDIRECT udp -- any sit0 anywhere anywhere udp dpt:domain redir ports 42001
06-03 06:46:29.63 A/V Chain idletimer_nat_POSTROUTING (0 references)
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.63 A/V Chain idletimer_nat_PREROUTING (0 references)
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.63 A/V Chain natctrl_nat_POSTROUTING (0 references)
06-03 06:46:29.63 A/V pkts bytes target prot opt in out source destination
06-03 06:46:29.71 A/V cppMainTcpServerLoop : started
06-03 06:46:38:798 L/D => setHackMode to 'Wifi' result : -1
06-03 06:46:40:013 W/I interfaces after script startlo(UP) 127.0.0.1/8, dummy0(DOWN), rmnet0(DOWN), rmnet1(DOWN), rmnet2(DOWN), rmnet3(DOWN), rmnet4(DOWN), rmnet5(DOWN), rmnet6(DOWN), rmnet7(DOWN), rmnet_sdio0(DOWN), rmnet_sdio1(DOWN), rmnet_sdio2(DOWN), rmnet_sdio3(DOWN), rmnet_sdio4(DOWN), rmnet_sdio5(DOWN), rmnet_sdio6(DOWN), rmnet_sdio7(DOWN), sit0(UP) 192.168.1.2/24, ip6tnl0(DOWN)
06-03 06:46:40:270 W/I route : destination : 0.0.0.0, gateway : 192.168.1.2, output : sit0
06-03 06:46:40:270 W/I route : destination : 192.168.1.0, gateway : 0.0.0.0, output : sit0
06-03 06:46:40:270 W/I
06-03 06:46:40:270 W/I Connection done

Server List at 06-03 06:47:17:088
domain (53) : A->H : 1000 ,H->A : 0

DNS List
202.159.219.229 (ok)
202.159.217.198 (ok)[default]
8.8.8.8
 
This is the snap
 

Attachments

  • tethering.jpg
    tethering.jpg
    94.8 KB · Views: 319
Works fine for me , I am on CM and using latest reverse tethering . restart PC and mobile . Sometimes it shows connected but no internet on mobile . Also keep DATA enabled on mobile .
It seems you dont have Xposed also .
I have it installed , you can try that also out
 
06-03 06:46:37:257 L/D Xposed installer : not installed, app_process : not found, XposedBridge.jar : not found
06-03 06:46:37:260 L/E Hack Connectivity Service not installed, mode : -1, trace : -1
Click to expand...

Install Xposed framework.
 
Status
Not open for further replies.
Top Bottom