PC Peripherals Problem with my new rig

C

coolpepe

Disciple
My new rig (20 days Old) is giving me problem. It just hangs after running for 10-15 minutes. It just freezes and i have to reset it. I have tried installing windows a couple of time but to no avail. My config is:

C2D E4400 2.00 GHZ
Galaxy 650i Ultra MB
1 GB DDR2 Dynet RAm
250 GB Hitachi SATA Drive
Galaxy 8400 GS GPU
Sony SATA DVD RW

Intex 450w PSU (Not real power)

1 92mm FAN on the side pannel
1 80 mm fan on back of the cabi.

Pls suggest something as i m very frustrated.
 
could be a problem with heat...

have you tried running your system wid the cabby open?

leave it open on one side.. nd see if u can make the cabinet lie down on its other side.. such that u have the ceiling fan blowing into it..
 
Check with Another Power Supply. If budget Permits exchange current one with Powersafe 400/500w.

Before this check with (if any) another PSU if problem solved buy Decent One.

HTH
 
Yeah so try a good PSU... Usually the 450w shud do but the PSU may be the culprit... Try removin and insertin the RAMs and finally replug all the power cables... :)
 
Back
Top